|
|
Post by johnnyg on Feb 16, 2010 15:35:56 GMT -5
I'm curious if there is LFE+Main option to send the low freq to the sub and fronts at the same time. My HK does this and I really like this option, but I've heard some AVRs don't have it as option. I'm pretty sure that is what the "Enhanced Bass" option does, but it isn't spelled out in the manual. According to the manual you need to set your mains to full range to use this option. |
|
|
|
Post by drummerdano1973 on Feb 16, 2010 20:09:45 GMT -5
Another thing I just noticed. When doing a manual speaker level set up, when you make a positive adjustment to the gain it jumps like 2 dbs in volume. Once you make it around all is somewhat good but anytime I have run adjustments today it has done the same thing.
|
|
|
|
Post by bobbart on Feb 17, 2010 6:54:02 GMT -5
Another thing I just noticed. When doing a manual speaker level set up, when you make a positive adjustment to the gain it jumps like 2 dbs in volume. Once you make it around all is somewhat good but anytime I have run adjustments today it has done the same thing. I had that same problem but only with the center channel output. I would bump it up .5db and it would go up at least 4-5 db on the sound meter. |
|
venaka
Emo VIPs 
There is always something bigger!
Posts: 146
|
Post by venaka on Feb 17, 2010 7:28:48 GMT -5
Manual is the way to go?
I set up Emo-q again last night..And it set my Bookshelf Klipsch RB-5 II's at 120hz, I did research in klipsch Forums and it turns out this setting is recommended. Why? Because they are small speakers I guess. And the sub is set at 75hz..
My eq gains were set pretty high , so I experimented in setting all of LR and C to flat 0 and I love it!!
Has anyone put the EQ at flat and has anyone tried running in FUll?
Anyone running the ERM 6.2 want to share their settings..
|
|
venaka
Emo VIPs
There is always something bigger!
Posts: 146
|
Post by venaka on Feb 17, 2010 12:17:08 GMT -5
anyone want to share their eq settings on erm's or any bookshelf for that matter.
|
|
|
|
Post by maseline98 on Feb 17, 2010 16:34:50 GMT -5
I'm curious if there is LFE+Main option to send the low freq to the sub and fronts at the same time. My HK does this and I really like this option, but I've heard some AVRs don't have it as option. I'm pretty sure that is what the "Enhanced Bass" option does, but it isn't spelled out in the manual. According to the manual you need to set your mains to full range to use this option. Would anybody else care to comment on this? Currently, I have my RF-7s crossed over at 60hz. Would putting them to 'full range' be a problem? Although, they are perfectly capable for going much lower, I just seemed to prefer them at that setting. It seemed to blend in the sub much better with enough midbass.... |
|
|
|
Post by maseline98 on Feb 23, 2010 10:17:55 GMT -5
I'm curious if there is LFE+Main option to send the low freq to the sub and fronts at the same time. My HK does this and I really like this option, but I've heard some AVRs don't have it as option. I'm pretty sure that is what the "Enhanced Bass" option does, but it isn't spelled out in the manual. According to the manual you need to set your mains to full range to use this option. Any definitive answer to this? |
|
