|
|
Post by drummerdano1973 on Apr 14, 2010 15:41:55 GMT -5
I know this might be quick in posting but it would be nice to here some feedback from the folks at Emotiva on this latest FW. Any one else agree??
|
|
|
|
Post by drummerdano1973 on Apr 14, 2010 15:57:33 GMT -5
After being frustrated most of the day I figured hey maybe something got corrupted on the FW between the laptop and UMC. So I decided to start the process all over.
Noticed something immediately. When getting ready to transfer the UMC-1_v6....... It looks like the file was modified late in the day yesterday. In process of doing the FW again. I will report back if it makes a difference but I could swear the file earlier yesterday was date stamped from 4/10/2010 and the one I just downloaded is from 4/13/2010 @ 17:40:36 and a different data length??
|
|
|
|
Post by brettjb on Apr 14, 2010 16:47:52 GMT -5
Hey Dano, When you got the firmware yesterday, did you download a single zip files with the 3 .upg files through the link on emotiva.com/umc1updates.shtm or did you go the back-door route and hit umcsoftware.com/updates/ ? I did notice the firmware on umcsoftware.com/updates/ went through a few different iterations yesterday. Because of the changes, I waited and grabbed it through the "official" link on the emotiva.com website. I haven't loaded it yet (got home late, didn't want to go through the whole setting up of inputs again, plus all the banter in the forums made me leery), so I can't yet speak to how well it works in my own setup... |
|
|
|
Post by threxx on Apr 14, 2010 16:54:54 GMT -5
Who runs umcsoftware.com? If it's a third party, why do we have two different sources? Sounds like a recipe for problems.
|
|
tkr
Minor Hero
Posts: 12
|
Post by tkr on Apr 14, 2010 17:06:40 GMT -5
From whois lookup:
umcsfotware.com...
Administrative Contact:
Laufman, Dan dan@jadedesign.com
Jade Design Inc.
131 Southeast Parkway Court
Franklin, Tennessee 37064
|
|
|
|
Post by saginawjuggalo on Apr 14, 2010 18:00:31 GMT -5
|
|
|
|
Post by drummerdano1973 on Apr 14, 2010 18:14:29 GMT -5
Reloaded new files as per previous post and same issues with audio drop outs, center channel dissapearing, sometimes just one of the fronts work, no treble or bass controls, noticed PLIIx went to PLII (??). PLII makes the rears just as loud as the fronts!! I downloaded the files straight from the UMC page--this is were I noticed the change on the one file as mentioned earlier. I am beginning to assume that some of are units are faulty. I got mine back in Feb which would make it first or second run I would think?? Any feedback from Emotiva would be great!!!!! Who did the beta testing with V6 FW?? Why were these issues not discovered then?? This is why I think some issues are hardware related not software. I'd rather have issues with my triggers than having audio drop outs CONSTANTLY!!!!  |
|
|
|
Post by ÈlTwo on Apr 14, 2010 21:06:57 GMT -5
Dan hasn't logged in since: Today at 1:41am
Lonnie last logged in at: Today at 3:19pm
I'm sure Lonnie is doing a lot of reading, and Dan will be.
I'd rather wait a day or so for an intelligent response; I'm sure they're still catching their breath from getting the update posted.
|
|
bootman
Emo VIPs 
Typing useless posts on internet forums....
Posts: 9,358
|
Post by bootman on Apr 14, 2010 21:46:52 GMT -5
Ask for a RMA.
This sounds like hardware.
|
|
|
|
Post by Cathy Laufman on Apr 14, 2010 23:08:49 GMT -5
Dan will be back on line in the morning. He took a road trip to TX to pick up the new Mobile Lounge!.
check out the pic, filling up in Arkansas We will be posting updates here and on facebook.
;D
|
|
|
|
Post by sbavnut on Apr 14, 2010 23:48:43 GMT -5
Well Cathy - can you please make sure that Dan takes care of the 10+ issues with the new FW (within one week)? If he doesn't, you should tell him that this "Mobile Lounge" will be his new sleeping quarters...  |
|
|
|
Post by jaakan79 on Apr 15, 2010 0:08:29 GMT -5
|
|
|
|
Post by BillBauman on Apr 15, 2010 0:15:06 GMT -5
|
|
|
|
Post by dotvibe on Apr 15, 2010 3:37:44 GMT -5
oh wow, cool mobile lounge!!!
|
|
|
|
Post by jannick on Apr 15, 2010 4:39:30 GMT -5
This was discussed earlier in this the UMC-1 Firmware??? thread (obviously not easy to find). I've posted MD5 checksums for all the .upg's over at the Emonatics UMC-1 page. The updater should really perform this check itself, enough things that is in doubt that this should not be open for operator error or oversight. |
|
|
|
Post by wizardofoz on Apr 15, 2010 7:43:41 GMT -5
This was discussed earlier in this the UMC-1 Firmware??? thread (obviously not easy to find). I've posted MD5 checksums for all the .upg's over at the Emonatics UMC-1 page. The site cant seem to supply any of the d/l files even the MD5 cant be found |
|
|
|
Post by BillBauman on Apr 15, 2010 7:49:24 GMT -5
This was discussed earlier in this the UMC-1 Firmware??? thread (obviously not easy to find). I've posted MD5 checksums for all the .upg's over at the Emonatics UMC-1 page. The site cant seem to supply any of the d/l files even the MD5 cant be found I just updated the site and moved all the firmware stuff to its own page: Emotiva UMC-1 Firmware Update Page |
|
|
|
Post by wizardofoz on Apr 15, 2010 8:07:20 GMT -5
Still broken
Not Found
The requested URL /USBXpress Device Driver x86 and x64.exe was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
|
|
|
|
Post by BillBauman on Apr 15, 2010 8:15:04 GMT -5
wizardofoz, Thank you! I forgot I was changing the folder structure around. When I did, I didn't get the links updated on the new FW page. Try now.
|
|
|
|
Post by drummerdano1973 on Apr 15, 2010 10:40:35 GMT -5
hey Bill. Just noticed something with the MD5 checklist. On your page you have it listed as UMC-1_v6_02_02_20100413.upg but the file I downloaded from EMO says UMC-1_v6_02_04_20100413.upg
Notice the difference? Anyway I tried the MD5 with everything and it tells me all the codes do not match. I am getting very FRUSTRATED---not at you at this whole process.
|
|
