|
|
Post by zdoggz on Feb 11, 2022 12:35:55 GMT -5
I just downloaded the user manual for your JVC. If you're up to it, here's something to try... In the settings menu of you JVC, go to "Input Signal", then "HDMI EDID Setting". There should be three options... A, B and C. Select " B". Then, turn off DSC and disable HDR10+. Reboot everything and see what happens... Incredibly helpful assistance! I am waiting on my JVC DLA-RS4100 and have made note of this to make sure if the same thing happens with my RMC1 that I have a path forward. THANK YOU FOR ALL YOU DO TO CONTRIBUTE YOUR TIME TO THE COMMUNITY! To sum it up, if you have sufficient cables and u have the same issue after completely rebooting the rmc as previously described, just be sure to reboot the projector after changing the EDID from A to B! In my case, it was all about the reboot of the Jvc. |
|
flac
Minor Hero
Posts: 11 
|
Post by flac on Feb 11, 2022 12:53:26 GMT -5
The RMC-1 doesn't support HDR10+? I've been upgrading my equipment to HDR10+ compatible components! That's disappointing if true. I cannot absolutely swear to it, but I don't think they've added the passthrough bits to support HDR10 + (not to be confused with HDR-10) on the current HDMI 2.0b board. That support will likely come with the HDMI 2.1 board that's currently in the works... I have been in touch with Emotiva for maybe over a year ago about HDR10+ passthrough, still no support. Doesn’t support it. |
|
cawgijoe
Emo VIPs 
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,032
|
Post by cawgijoe on Feb 11, 2022 13:05:15 GMT -5
I cannot absolutely swear to it, but I don't think they've added the passthrough bits to support HDR10 + (not to be confused with HDR-10) on the current HDMI 2.0b board. That support will likely come with the HDMI 2.1 board that's currently in the works... I have been in touch with Emotiva for maybe over a year ago about HDR10+ passthrough, still no support. Doesn’t support it. I believe that it will be supported when the new board is released. The HDMI 2.1 board as doc said. That will be an upgrade that you would have to pay for. Hopefully it's a DIY rather than a "send in" of your processor. |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,032
|
Post by cawgijoe on Feb 11, 2022 13:05:29 GMT -5
I cannot absolutely swear to it, but I don't think they've added the passthrough bits to support HDR10 + (not to be confused with HDR-10) on the current HDMI 2.0b board. That support will likely come with the HDMI 2.1 board that's currently in the works... I have been in touch with Emotiva for maybe over a year ago about HDR10+ passthrough, still no support. Doesn’t support it. I believe that it will be supported when the new board is released. The HDMI 2.1 board as doc said. That will be an upgrade that you would have to pay for. Hopefully it's a DIY rather than a "send in" of your processor. Not sure if there are plans in place to add it to the current board, or even if it can be. Keith - do you have any knowledge regarding this? |
|
|
|
Post by fjd on Feb 11, 2022 13:15:27 GMT -5
I have a Samsung QN65QN90A and have the same problems:
(1.) No display/Audio with message displayed on TV "check device power"
> sometimes selecting a different Input on remote 1 to 2 back to 1 again
resolves this issue. If not, then a REBOOT on the RMC-1 by way of holding down
the STANDBY button for FULL reboot aways works.
(2.) ARC has always been an issue for me. The common denominator... A Samsung TV.
I did have it work with my first Samsung UN55D800 paired with an XMC-1 about
80% of the time.
With the New Samsung QN65QN90A (8K) with the 'One connect Box', I have had NO LUCK !!!
|
|
flac
Minor Hero
Posts: 11
|
Post by flac on Feb 11, 2022 13:24:23 GMT -5
I have been in touch with Emotiva for maybe over a year ago about HDR10+ passthrough, still no support. Doesn’t support it. I believe that it will be supported when the new board is released. The HDMI 2.1 board as doc said. That will be an upgrade that you would have to pay for. Hopefully it's a DIY rather than a "send in" of your processor. Not sure if there are plans in place to add it to the current board, or even if it can be. Keith - do you have any knowledge regarding this? Processors/Receivers with HDMI 2.0 supports it today, not all, but many. It’s not OK that you need to buy new hardware (HDMI 2.1) for this feature. Only my opinion. |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,032
|
Post by cawgijoe on Feb 11, 2022 13:29:42 GMT -5
I believe that it will be supported when the new board is released. The HDMI 2.1 board as doc said. That will be an upgrade that you would have to pay for. Hopefully it's a DIY rather than a "send in" of your processor. Not sure if there are plans in place to add it to the current board, or even if it can be. Keith - do you have any knowledge regarding this? Processors/Receivers with HDMI 2.0 supports it today, not all, but many. It’s not OK that you need to buy new hardware (HDMI 2.1) for this feature. Only my opinion. Do we know for SURE that the current HDMI board does not support? Is this what Emotiva has told you? I personally don't know. |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,032
|
Post by cawgijoe on Feb 11, 2022 13:31:38 GMT -5
I have a Samsung QN65QN90A and have the same problems: (1.) No display/Audio with message displayed on TV "check device power" > sometimes selecting a different Input on remote 1 to 2 back to 1 again resolves this issue. If not, then a REBOOT on the RMC-1 by way of holding down the STANDBY button for FULL reboot aways works. (2.) ARC has always been an issue for me. The common denominator... A Samsung TV. I did have it work with my first Samsung UN55D800 paired with an XMC-1 about 80% of the time. With the New Samsung QN65QN90A (8K) with the 'One connect Box', I have had NO LUCK !!! My Samsung has the One Connect Box, however I don't use ARC/CEC and all works well with my current setup and XMC-2. |
|
ttocs
Global Moderator 
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,131
Member is Online
|
Post by ttocs on Feb 11, 2022 13:54:36 GMT -5
I cannot absolutely swear to it, but I don't think they've added the passthrough bits to support HDR10 + (not to be confused with HDR-10) on the current HDMI 2.0b board. That support will likely come with the HDMI 2.1 board that's currently in the works... I have been in touch with Emotiva for maybe over a year ago about HDR10+ passthrough, still no support. Doesn’t support it. I'm trying to find a movie that is streamed in HDR10+. What titles might there be that I can check, and which streaming service provides movies in HDR10+? |
|
doc1963
Emo VIPs
Posts: 5,017
Member is Online
|
Post by doc1963 on Feb 11, 2022 13:58:08 GMT -5
I have been in touch with Emotiva for maybe over a year ago about HDR10+ passthrough, still no support. Doesn’t support it. I'm trying to find a movie that is streamed in HDR10+. What titles might there be that I can check, and which streaming service provides movies in HDR10+? Amazon Prime is the only streaming service that I'm aware of that provides content in HDR10+. And of that, it's probably only their own "original content". What's more, your source devices and your display must also support HDR10+. My display does not (and likely never will)...  |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,032
|
Post by cawgijoe on Feb 11, 2022 13:59:36 GMT -5
I have been in touch with Emotiva for maybe over a year ago about HDR10+ passthrough, still no support. Doesn’t support it. I'm trying to find a movie that is streamed in HDR10+. What titles might there be that I can check, and which streaming service provides movies in HDR10+? Amazon Prime, I believe is one. |
|
|
|
Post by Topend on Feb 11, 2022 14:02:00 GMT -5
The RMC-1 doesn't support HDR10+? I've been upgrading my equipment to HDR10+ compatible components! That's disappointing if true. I cannot absolutely swear to it, but I don't think they've added the passthrough bits to support HDR10 + (not to be confused with HDR-10) on the current HDMI 2.0b board. That support will likely come with the HDMI 2.1 board that's currently in the works... I can confirm this is still the case. I brought this up a long time ago,Keith responded and knows HDR10+ doesn’t pass through. Like you, my guess is it will come with the new HDMI board. Cheers, Dave. |
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,032
|
Post by cawgijoe on Feb 11, 2022 14:42:14 GMT -5
I cannot absolutely swear to it, but I don't think they've added the passthrough bits to support HDR10 + (not to be confused with HDR-10) on the current HDMI 2.0b board. That support will likely come with the HDMI 2.1 board that's currently in the works... I can confirm this is still the case. I brought this up a long time ago,Keith responded and knows HDR10+ doesn’t pass through. Like you, my guess is it will come with the new HDMI board. Cheers, Dave. So out of curiousity, I just checked Crutchfield's website and all of the receivers they are selling that support HDR10+ also have HDMI 2.1. None of the HDMI 2.0b receivers support HDR10+. HDR10 but not plus. Does anyone know if there are any receivers with HDMI 2.0b that support HDR10+? I'm going to take a look at the prepros now. Edit: same is true for the prepros.... Assumption is that Crutchfield's information is correct. So, does that mean HDMI2.0b does not support HDR10+? Pulled this quote off of "Digital Trends": "But wait: Isn’t HDR10+ already possible using HDMI 2.0b? Technically, yes, but it’s not an officially supported technology when done over HDMI 2.0b. HDMI 2.1 makes it official, which in turn should make it highly reliable." |
|
|
|
Post by Thunderduck on Feb 11, 2022 14:48:10 GMT -5
|
|
doc1963
Emo VIPs
Posts: 5,017
Member is Online
|
Post by doc1963 on Feb 11, 2022 15:19:11 GMT -5
I can confirm this is still the case. I brought this up a long time ago,Keith responded and knows HDR10+ doesn’t pass through. Like you, my guess is it will come with the new HDMI board. Cheers, Dave. So out of curiousity, I just checked Crutchfield's website and all of the receivers they are selling that support HDR10+ also have HDMI 2.1. None of the HDMI 2.0b receivers support HDR10+. HDR10 but not plus. Does anyone know if there are any receivers with HDMI 2.0b that support HDR10+? I'm going to take a look at the prepros now. Edit: same is true for the prepros.... Assumption is that Crutchfield's information is correct. So, does that mean HDMI2.0b does not support HDR10+? "Dynamic HDR" is part of the HDMI 2.1 spec and would be supported by any AVR/AVP that meets the spec. Having said that, HDMI 2.1 products started rolling out back in 2018-19, so there's already a ton of product out there that will pass it. However, above all else, your display must support HDR10+ otherwise the entire point is moot. Because of its origin, there are several display manufacturers that will never support "HDR10+" regardless of "Dynamic HDR" being part of the HDMI 2.1 spec. As to HDMI 2.0b products... Since Samsung's version of Dynamic HDR (which is HDR10+) was not part of the spec and was not well received, manufacturers were not inclined to support it even though it was entirely possible to do so via firmware (OPPO, for example, did it). FWIW, Sound United never bothered to add HDR10+ support to my AV8805 short of the 2.1 "A" upgrade. Since they added eARC (which also doesn't appear in the 2.0b spec), I'm sure they could have done so... |
|
|
|
Post by donh50 on Feb 11, 2022 15:59:46 GMT -5
Putting the words "HDMI" and "highly reliable" together is an oxymoron that should come with severe penalties IME/IMO.
|
|
|
|
Post by foggy1956 on Feb 11, 2022 16:24:59 GMT -5
I have a Samsung QN65QN90A and have the same problems: (1.) No display/Audio with message displayed on TV "check device power" > sometimes selecting a different Input on remote 1 to 2 back to 1 again resolves this issue. If not, then a REBOOT on the RMC-1 by way of holding down the STANDBY button for FULL reboot aways works. (2.) ARC has always been an issue for me. The common denominator... A Samsung TV. I did have it work with my first Samsung UN55D800 paired with an XMC-1 about 80% of the time. With the New Samsung QN65QN90A (8K) with the 'One connect Box', I have had NO LUCK !!! My Samsung has the One Connect Box, however I don't use ARC/CEC and all works well with my current setup and XMC-2. My Samsung does not have the One Connect Box and also works fine. I don't use ARC/CEC either |
|
ttocs
Global Moderator
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,131
Member is Online
|
Post by ttocs on Feb 11, 2022 16:48:02 GMT -5
I'm trying to find a movie that is streamed in HDR10+. What titles might there be that I can check, and which streaming service provides movies in HDR10+? Amazon Prime, I believe is one. Do you know any movie titles I could search for please? I know there are streaming services which are "said" to be streaming HDR10+, but I really need the movie titles specifically. |
|
|
|
Post by drabbs on Feb 11, 2022 17:10:23 GMT -5
|
|
cawgijoe
Emo VIPs
"When you come to a fork in the road, take it." - Yogi Berra
Posts: 5,032
|
Post by cawgijoe on Feb 11, 2022 19:01:07 GMT -5
Amazon Prime, I believe is one. Do you know any movie titles I could search for please? I know there are streaming services which are "said" to be streaming HDR10+, but I really need the movie titles specifically. I’ll take a look when I get home unless you find one before then. Friday night. Out to dinner. |
|
