NicS
Sensei
Will the G4 upgrade help quell my RMC1-L frustrations...?
Posts: 238
|
Post by NicS on Jul 13, 2022 17:14:55 GMT -5
Wouldn't it be a good idea, to create a RMC-1/RMC-1L/XMC-2 Owners Thread (Post Firmware v2.50) to start only with issues about the upcoming V3.0? Yes, but only when once it's been out a week or so. Then the first post can have sections like: Remaining issues from previous firmware versions: New issues discovered in this firmware: ....does the new caramel latte function work properly. Is it better than Starbucks? |
|
Lsc
Emo VIPs 
Posts: 3,425
|
Post by Lsc on Jul 13, 2022 19:17:54 GMT -5
Lots of pages since v1.10.
Anyone else feel like their processor has come a long way?
|
|
|
|
Post by JKCashin on Jul 13, 2022 20:25:31 GMT -5
Lots of pages since v1.10. Anyone else feel like their processor has come a long way? YES! |
|
|
|
Post by JKCashin on Jul 13, 2022 20:26:27 GMT -5
Whoever creates the new post could you leave a couple of postings at the front for us to add some links which we can send to you for instance links to the various versions in this thread
|
|
|
|
Post by sandbagger on Jul 13, 2022 21:37:49 GMT -5
Yes, but only when once it's been out a week or so. Then the first post can have sections like: Remaining issues from previous firmware versions: New issues discovered in this firmware: ....does the new caramel latte function work properly. Is it better than Starbucks? I would be willing to settle for better than NAVY coffee at this point  |
|
|
|
Post by AudioHTIT on Jul 13, 2022 23:55:07 GMT -5
Whoever creates the new post could you leave a couple of postings at the front for us to add some links which we can send to you for instance links to the various versions in this thread As LCSeminole did for this thread, he’d likely be the best person to start a new one, as he’s both an owner and a mod.. |
|
LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,821
|
Post by LCSeminole on Jul 14, 2022 5:58:10 GMT -5
Whoever creates the new post could you leave a couple of postings at the front for us to add some links which we can send to you for instance links to the various versions in this thread As LCSeminole did for this thread, he’d likely be the best person to start a new one, as he’s both an owner and a mod.. Most definitely. Setting up a new Owner/Firmware thread will done just like the Dirac thread that ‘audiohtit’ started with several blank posts at the front to add for future updates, info and links so everyone can see the latest without having to weed through pages of off-topic subjects that inevitably gets posted(which the moderators may delete from time to time to declutter). |
|
|
|
Post by JKCashin on Jul 14, 2022 8:58:52 GMT -5
Whoever creates the new post could you leave a couple of postings at the front for us to add some links which we can send to you for instance links to the various versions in this thread As LCSeminole did for this thread, he’d likely be the best person to start a new one, as he’s both an owner and a mod.. Good point |
|
EmoBrent
Emo Staff
Processor and Product Support
Posts: 54
|
Post by EmoBrent on Jul 14, 2022 11:48:30 GMT -5
Spoke to Keith, and I think one of us from Emotiva will start an official post-3.0 FW thread once ready. We will include some empty placeholder posts as suggested, and we will try to keep spots for a summary of firmware issues that may appear, etc., or links to older posts and versions, other notes and resources related to 3.0. If others can hold off creating a post for now or any kind of preliminary 3.0 thread before the release, we will get something put up for everyone.
|
|
|
|
Post by AudioHTIT on Jul 14, 2022 12:07:52 GMT -5
Spoke to Keith, and I think one of us from Emotiva will start an official post-3.0 FW thread once ready. We will include some empty placeholder posts as suggested, and we will try to keep spots for a summary of firmware issues that may appear, etc., or links to older posts and versions, other notes and resources related to 3.0. If others can hold off creating a post for now or any kind of preliminary 3.0 thread before the release, we will get something put up for everyone. That's an unusual move and suggests 'sponsorship' as traditionally these types of threads are started by and considered for 'owners', and this is predominantly an owner / user based board, although sponsored and administered by Emotiva. I only point this out because the OP traditionally has the role of setting the tone and scope of the thread, and making sure it stays on topic (as much as these things can be steered). So whoever starts this new tread takes on that responsibility, as well as the maintenance of the first few posts for reference material as suggested and typical. If this is part of an enhanced presence in the Lounge, great, just setting expectations. |
|
EmoBrent
Emo Staff
Processor and Product Support
Posts: 54
|
Post by EmoBrent on Jul 14, 2022 12:20:47 GMT -5
Spoke to Keith, and I think one of us from Emotiva will start an official post-3.0 FW thread once ready. We will include some empty placeholder posts as suggested, and we will try to keep spots for a summary of firmware issues that may appear, etc., or links to older posts and versions, other notes and resources related to 3.0. If others can hold off creating a post for now or any kind of preliminary 3.0 thread before the release, we will get something put up for everyone. That's an unusual move and suggests 'sponsorship' as traditionally these types of threads are started by and considered for 'owners', and this is predominantly an owner / user based board, although sponsored and administered by Emotiva. I only point this out because the OP traditionally has the role of setting the tone and scope of the thread, and making sure it stays on topic (as much as these things can be steered). So whoever starts this new tread takes on that responsibility, as well as the maintenance of the first few posts for reference material as suggested and typical. If this is part of an enhanced presence in the Lounge, great, just setting expectations. Yes, we discussed this briefly, and if we do start the thread, we will own it. But I think that is a valid point and something we will talk about again so that things don't go unattended or descend into chaos. I plan to continue my involvement on the new thread and already have some resources to include in initial posts. If anyone is opposed to one of us starting the thread and would rather it be started by a non-Emotiva-staff member, I don't think that would be an issue. But the idea is to be more involved, however that ends up looking. |
|
|
|
Post by marcl on Jul 14, 2022 12:38:30 GMT -5
That's an unusual move and suggests 'sponsorship' as traditionally these types of threads are started by and considered for 'owners', and this is predominantly an owner / user based board, although sponsored and administered by Emotiva. I only point this out because the OP traditionally has the role of setting the tone and scope of the thread, and making sure it stays on topic (as much as these things can be steered). So whoever starts this new tread takes on that responsibility, as well as the maintenance of the first few posts for reference material as suggested and typical. If this is part of an enhanced presence in the Lounge, great, just setting expectations. Yes, we discussed this briefly, and if we do start the thread, we will own it. But I think that is a valid point and something we will talk about again so that things don't go unattended or descend into chaos. I plan to continue my involvement on the new thread and already have some resources to include in initial posts. If anyone is opposed to one of us starting the thread and would rather it be started by a non-Emotiva-staff member, I don't think that would be an issue. But the idea is to be more involved, however that ends up looking. I certainly appreciate Emotiva being more involved. Until now many of us churn with ideas and questions and just go in circles for a while hoping for some Emotiva input. Lots of speculation just often ends in frustration. More regular response to topics would be appreciated. Of course KeithL has been most prolific in commenting on may topics ... much appreciated! |
|
|
|
Post by PaulBe on Jul 14, 2022 20:55:44 GMT -5
That's an unusual move and suggests 'sponsorship' as traditionally these types of threads are started by and considered for 'owners', and this is predominantly an owner / user based board, although sponsored and administered by Emotiva. I only point this out because the OP traditionally has the role of setting the tone and scope of the thread, and making sure it stays on topic (as much as these things can be steered). So whoever starts this new tread takes on that responsibility, as well as the maintenance of the first few posts for reference material as suggested and typical. If this is part of an enhanced presence in the Lounge, great, just setting expectations. Yes, we discussed this briefly, and if we do start the thread, we will own it. But I think that is a valid point and something we will talk about again so that things don't go unattended or descend into chaos. I plan to continue my involvement on the new thread and already have some resources to include in initial posts. If anyone is opposed to one of us starting the thread and would rather it be started by a non-Emotiva-staff member, I don't think that would be an issue. But the idea is to be more involved, however that ends up looking. I prefer an Emotiva started thread for the 3.0 firmware update. Hopefully with less clutter and more meat and potatoes. A parallel talky-talk 3.0 thread could be started by the owners with less concern for the inevitable descent into chaos. Put valuable cross referenced links to each other at the top of the threads. |
|
|
|
Post by thezone on Jul 14, 2022 21:11:28 GMT -5
I believe that FW 3.0 will be the holy grail, the chosen one, the one that will bring balance to all processors, prefect in everyway and will solve all of our issues and there will be no need for a new thread at all!  |
|
|
|
Post by ElectricKoolAid on Jul 15, 2022 8:40:17 GMT -5
I believe that FW 3.0 will be the holy grail, the chosen one, the one that will bring balance to all processors, prefect in everyway and will solve all of our issues and there will be no need for a new thread at all! All of us if firmware 3.0 doesn't live up to the hype:   |
|
|
|
Post by markc on Jul 19, 2022 12:06:00 GMT -5
I believe that FW 3.0 will be the holy grail, the chosen one, the one that will bring balance to all processors, prefect in everyway and will solve all of our issues and there will be no need for a new thread at all! All of us if firmware 3.0 doesn't live up to the hype: We are all aware that we need to start learning lines and beginning dress rehearsals for the inevitable... There is blind faith, and then there is hopelessness and 379 pages=earned hopelessness |
|
|
|
Post by marcl on Jul 19, 2022 12:35:29 GMT -5
All of us if firmware 3.0 doesn't live up to the hype: We are all aware that we need to start learning lines and beginning dress rehearsals for the inevitable... There is blind faith, and then there is hopelessness and 379 pages=earned hopelessness Expectations .... all we should expect of 3.0 is the HDMI/eARC/ARC stuff that has been talked about. Nothing else. And hopefully no new surprise bugs. If there's more than that? Gravy ... |
|
ttocs
Global Moderator
I always have a wonderful time, wherever I am, whomever I'm with. (Elwood P Dowd)
Posts: 8,104
|
Post by ttocs on Jul 19, 2022 12:57:13 GMT -5
Expectations .... all we should expect of 3.0 is the HDMI/eARC/ARC stuff that has been talked about. Nothing else. Absolutely. Don't expect anything which wasn't promised. |
|
NicS
Sensei
Will the G4 upgrade help quell my RMC1-L frustrations...?
Posts: 238
|
Post by NicS on Jul 19, 2022 15:10:17 GMT -5
Expectations .... all we should expect of 3.0 is the HDMI/eARC/ARC stuff that has been talked about. Nothing else. Absolutely. Don't expect anything which wasn't promised. Problem is, quite a bit was promised from the outset. Like DSD over USB for example. Though I'd be happy to be able to play Blu-Rays again. |
|
|
|
Post by marcl on Jul 19, 2022 15:33:42 GMT -5
Absolutely. Don't expect anything which wasn't promised. Problem is, quite a bit was promised from the outset. Like DSD over USB for example. Though I'd be happy to be able to play Blu-Rays again. Speaking specifically about 3.0, in terms of expectations. Yes, lots of other stuff has been promised and we know there's a 4.0 coming. But the semi-leaked notes for 3.0 only mentioned the eARC/ARC/HDMI stuff. |
|
