LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,850
|
Post by LCSeminole on Nov 16, 2022 15:38:10 GMT -5
The ‘updating fonts’ step does not go away and keeps doing it at each cold boot. Is that supposed to be like this? It says complete each time as well. annoying, as it adds time to the cold boot (energy saving in europe  ). A couple of the beta testers found this issue, myself being one of them. It is definitely being worked on, it hasn't affected the usability or stability of this new firmware, and just adds a little more time to the cold boot, otherwise my RMC-1 is quite stable. |
|
|
|
Post by Topend on Nov 16, 2022 15:41:54 GMT -5
Great news! The ‘updating fonts’ step does not go away and keeps doing it at each cold boot. Is that supposed to be like this? It says complete each time as well. annoying, as it adds time to the cold boot (energy saving in europe ). I'm getting the "updating fonts" repeating too. My XMC-2 displayed "fonts complete" and shut down. I waited 10 minutes and switched off the rear switch. When it reboots it returns to "updating fonts". This happened twice so far. It does show FW3.1 when I checked. Cheers, Dave. |
|
|
|
Post by Topend on Nov 16, 2022 15:42:38 GMT -5
Great news! The ‘updating fonts’ step does not go away and keeps doing it at each cold boot. Is that supposed to be like this? It says complete each time as well. annoying, as it adds time to the cold boot (energy saving in europe ). I'm getting the "updating fonts" repeating too. My XMC-2 displayed "fonts complete" and shut down but did not power back on. I waited 10 minutes and switched off the rear switch. When it reboots it returns to "updating fonts". This happened twice so far. It does show FW3.1 when I checked. Cheers, Dave. |
|
|
|
Post by PaulBe on Nov 16, 2022 15:43:57 GMT -5
I am almost afraid to update. Shut off my TV? This one seems complex. Don't be afraid, it's very straightforward and if you have any questions, we are here to help. Lonnie I get the "Updating Fonts" screens at boot ups as well. I understand it is under investigation. No need to reply. Everything else seems good. |
|
NicS
Sensei
Will the G4 upgrade help quell my RMC1-L frustrations...?
Posts: 238
|
Post by NicS on Nov 16, 2022 15:44:36 GMT -5
Oh well....
Hopes and dreams dashed onto the rocks.
AppleTV 4K worked as before.
Firestick works as before
SACD Audio play, as before
Nothing from BluRay. Not a thing. Just a momentary flick of image on the screen, then black.
Tried HDMI 1.4 & 2
Tried a Sony X-800 BluRay
Reavon UBR X110
Reavon UBR X200
Panasonic UB-9000....
Just still can't play BluRays. All I see on the screen is "Unsupported Source"
....time for the next step.
|
|
Lonnie
Emo Staff
admin
Pay no attention to the man behind the curtain
Posts: 6,999
|
Post by Lonnie on Nov 16, 2022 15:44:57 GMT -5
It appears as though the checksum on older HDMI boards is telling the system to update the fonts. Nothing to worry about, it just reloads what you already have. It will only do this on a low power boot, so if you change your settings to Video Remains On, then it won't show up.
We are looking into why it thinks it needs to reload the fonts and will get it resolved, but don't worry, it doesn't affect anything. It just takes a little longer to boot from low power.
I recommend you change your settings to Video Remains On and it will solve the problem.
Lonnie
|
|
Lonnie
Emo Staff
admin
Pay no attention to the man behind the curtain
Posts: 6,999
|
Post by Lonnie on Nov 16, 2022 15:47:03 GMT -5
Oh well.... Hopes and dreams dashed onto the rocks. AppleTV 4K worked as before. Firestick works as before SACD Audio play, as before Nothing from BluRay. Not a thing. Just a momentary flick of image on the screen, then black. Tried HDMI 1.4 & 2 Tried a Sony X-800 BluRay Reavon UBR X110 Reavon UBR X200 Panasonic UB-9000.... Just still can't play BluRays. All I see on the screen is "Unsupported Source" ....time for the next step. Are you running a powered HDMI cable or passive? From what I see here, it simply sounds like a bandwidth issue to me, but I don't know all the details. Lonnie |
|
|
|
Post by sebna on Nov 16, 2022 15:52:20 GMT -5
I salute you, you brave, brave people I will wait substantial longer before updating. Probably until 3.1x. Still great it is out and about |
|
|
|
Post by rovinggecko on Nov 16, 2022 15:55:24 GMT -5
It appears as though the checksum on older HDMI boards is telling the system to update the fonts. Nothing to worry about, it just reloads what you already have. It will only do this on a low power boot, so if you change your settings to Video Remains On, then it won't show up. We are looking into why it thinks it needs to reload the fonts and will get it resolved, but don't worry, it doesn't affect anything. It just takes a little longer to boot from low power. I recommend you change your settings to Video Remains On and it will solve the problem. Lonnie Thanks for the super fast response Lonnie ( and LCSeminole). I’ll live with it for a bit. The bitrate plops are on a different level now, much better, of course, if there is room left to tweak, great. Sound wise, something is better, maybe the firmware, maybe factory reset, maybe mindset, but I’ll take it thanks! |
|
|
|
Post by Priapulus on Nov 16, 2022 15:58:21 GMT -5
I did it; no problems. Font loading only once.
/b
|
|
|
|
Post by jeffrey40sw on Nov 16, 2022 16:01:27 GMT -5
I’m getting the updating fonts as well on my XMC2 and then it didn’t see apple my tv. I didn’t play with it much though. I switched to the video remains on mode mode and it’s all good. Something definitely going on with the low power standby though.
|
|
|
|
Post by Topend on Nov 16, 2022 16:02:23 GMT -5
It appears as though the checksum on older HDMI boards is telling the system to update the fonts. Nothing to worry about, it just reloads what you already have. It will only do this on a low power boot, so if you change your settings to Video Remains On, then it won't show up. We are looking into why it thinks it needs to reload the fonts and will get it resolved, but don't worry, it doesn't affect anything. It just takes a little longer to boot from low power. I recommend you change your settings to Video Remains On and it will solve the problem. Lonnie Thanks Lonnie. I use Video Remains On so all good so far. Coincidentally I'm on a day off today so will get to try it out. Dave. |
|
NicS
Sensei
Will the G4 upgrade help quell my RMC1-L frustrations...?
Posts: 238
|
Post by NicS on Nov 16, 2022 16:02:54 GMT -5
Oh well.... Hopes and dreams dashed onto the rocks. AppleTV 4K worked as before. Firestick works as before SACD Audio play, as before Nothing from BluRay. Not a thing. Just a momentary flick of image on the screen, then black. Tried HDMI 1.4 & 2 Tried a Sony X-800 BluRay Reavon UBR X110 Reavon UBR X200 Panasonic UB-9000.... Just still can't play BluRays. All I see on the screen is "Unsupported Source" ....time for the next step. Are you running a powered HDMI cable or passive? From what I see here, it simply sounds like a bandwidth issue to me, but I don't know all the details. Lonnie The exact Brand and Model of cable you asked me to purchase Lonnie |
|
Lonnie
Emo Staff
admin
Pay no attention to the man behind the curtain
Posts: 6,999
|
Post by Lonnie on Nov 16, 2022 16:03:42 GMT -5
In regards to the loading of the fonts from low power standby. It appears as though the checksum on older HDMI boards is telling the system to update the fonts. Nothing to worry about, it just reloads what you already have. It will only do this on a low power boot, so if you change your settings to Video Remains On, then it won't show up. We are looking into why it thinks it needs to reload the fonts and will get it resolved, but don't worry, it doesn't affect anything. It just takes a little longer to boot from low power. I recommend you change your settings to Video Remains On and it will solve the problem. Lonnie |
|
|
|
Post by PaulBe on Nov 16, 2022 16:07:29 GMT -5
In regards to the loading of the fonts from low power standby. It appears as though the checksum on older HDMI boards is telling the system to update the fonts. Nothing to worry about, it just reloads what you already have. It will only do this on a low power boot, so if you change your settings to Video Remains On, then it won't show up. We are looking into why it thinks it needs to reload the fonts and will get it resolved, but don't worry, it doesn't affect anything. It just takes a little longer to boot from low power. I recommend you change your settings to Video Remains On and it will solve the problem. Lonnie Now you are going to add $4/month to my electric bill. The Bidenistas are gonna come and spank me! |
|
Lonnie
Emo Staff
admin
Pay no attention to the man behind the curtain
Posts: 6,999
|
Post by Lonnie on Nov 16, 2022 16:10:25 GMT -5
Are you running a powered HDMI cable or passive? From what I see here, it simply sounds like a bandwidth issue to me, but I don't know all the details. Lonnie The exact Brand and Model of cable you asked me to purchase Lonnie Hey NicS, I just put 2 and 2 together. I was going back through our previous discussion and I don't see where I mentioned the cable, can you remind me please? I would appreciate it. Lonnie |
|
EmoBrent
Emo Staff
Processor and Product Support
Posts: 54
|
Post by EmoBrent on Nov 16, 2022 16:13:26 GMT -5
Questions: I’ve performed the update but want to check a few things: Is this right? Firmware Version 3.1 22/11/14 FP Version 2.11 21/05/11 Kernel Version 1.2 18/02/08 HDMI Version 8.1 20/09/28 DSPO Version 3.1 22/11/14 DSP1 Version 3.1 22/11/14 USB Version 3.1 22/11/14 Those look correct, HDMI version may vary on some machines. |
|
NicS
Sensei
Will the G4 upgrade help quell my RMC1-L frustrations...?
Posts: 238
|
Post by NicS on Nov 16, 2022 16:14:02 GMT -5
The exact Brand and Model of cable you asked me to purchase Lonnie Hey NicS, I just put 2 and 2 together. I was going back through our previous discussion and I don't see where I mentioned the cable, can you remind me please? I would appreciate it. Lonnie Lonnie, I looked back trough my emails. It was actually Brent who recommended the cable: RUIPRO 8K Fiber Optic HDMI Cable 48Gbps 8K / 60Hz 4K / 120Hz Dynamic HDR eARC HDCP2.2/2.3 |
|
NicS
Sensei
Will the G4 upgrade help quell my RMC1-L frustrations...?
Posts: 238
|
Post by NicS on Nov 16, 2022 16:18:27 GMT -5
Hey NicS, I just put 2 and 2 together. I was going back through our previous discussion and I don't see where I mentioned the cable, can you remind me please? I would appreciate it. Lonnie Lonnie, I looked back trough my emails. It was actually Brent who recommended the cable: RUIPRO 8K Fiber Optic HDMI Cable 48Gbps 8K / 60Hz 4K / 120Hz Dynamic HDR eARC HDCP2.2/2.3 I went back to my grump Squid-Head self for the occasion.... |
|
EmoBrent
Emo Staff
Processor and Product Support
Posts: 54
|
Post by EmoBrent on Nov 16, 2022 16:20:15 GMT -5
Are you running a powered HDMI cable or passive? From what I see here, it simply sounds like a bandwidth issue to me, but I don't know all the details. Lonnie The exact Brand and Model of cable you asked me to purchase Lonnie If you need support, please contact us to initiate this if you would like. You still have the option that has been open for months to send the unit in for service under the warranty. But I still believe this to be an HDCP conflict of some kind with the particular combination of devices and age of the projector you are using. The exact same Reavon and other BRP work fine here with our processors and all of the displays I have tried it with, including multiple 1080p projectors and 4K TVs. I was just using the Reavon yesterday in fact. We may be able to find something in hardware if you choose to send it in. Thanks. |
|
).
