|
|
Post by pop on Nov 14, 2023 20:53:24 GMT -5
Setting up a new office desk and I’m putting a pair of Wharfedale Lintons behind it. Would like to put them on monoblocks. Looking for old gen UPA1
- XPA1L - XPA1 must be in good cosmetic shape and working order. Thanks! Hope all are well around here. It’s been a while for me.
|
|
|
|
Post by creimes on Nov 17, 2023 2:54:06 GMT -5
|
|
|
|
Post by mgbpuff on Nov 18, 2023 10:27:00 GMT -5
If you don't want to spend a lot of money, why not try some new cheapies. 1) If you don't mind being limited to bluetooth only, the Vera-Link mono amps (50wpc) can be velcroed on the back of your speakers with only power wiring. It sounds way better than its $149 (Black Friday pricing) would lead you to believe. I use it on an old set of JBL 120L bookshelves. Need more power and a traditional analog line level input? Try Nobsound G2 Pro monoblocs (300 wpc @ $79.95 ea from Amazon.) They are nearly as small and light as the Vera-Links. They are sold as sub amps, but they have a full range mode. I velcroed these to the back of a pair of old AR2ax and again these sound startling good. Need a pre? I used a little Douk Audio T8 graphic eq. tube pre ($119) with the Nobsounds because the AR2x definitely needs some treble boost and low cut to make it sound up to date. This stuff is surprisingly good and a lot of fun.
|
|
|
|
Post by vcautokid on Nov 18, 2023 10:35:27 GMT -5
Creimes is spot on if you want standalone monos, also with a warranty. Used never has one, also the UPA1 and XPA1L will undoubtedly be close to re cap time, and additional expense. I would always buy new if no additional work needed to be done is desired. When buying used unless really new-ish assume it is going to need something. Heck the BAS-X Monos are a good buy too. New with warranty too. Thinking about one for a center channel myself, or the Outlaw. Options are nice.
|
|
|
|
Post by vcautokid on Nov 18, 2023 10:38:00 GMT -5
You will have to wait though for Outlaw out of stock currently.  |
|
|
|
Post by pop on Nov 18, 2023 22:29:09 GMT -5
I’m not opposed to the outlaws. Have any of you actually used them?
|
|
|
|
Post by creimes on Nov 19, 2023 2:30:25 GMT -5
I’m not opposed to the outlaws. Have any of you actually used them? I myself haven't used the M2220 but my 7000X is amazing, I linked it as I seen their email, I like all the Emotiva's as well but I couldn't pay what the out of warranty amps seem to sell for used, I have seen them sell for more than new up here in Canada, the M2220 for $300 new is a great deal IMO for what is out there these days. Chad |
|
|
|
Post by mountain on Nov 19, 2023 8:58:28 GMT -5
I’m not opposed to the outlaws. Have any of you actually used them? I have had the outlaw model 7200 (7 x 200 watts @ 8 ohms all channels driven) for about 10 yeas and still love them. I have never had a problem with this amp. |
|
butchgo
Emo VIPs 
The Dark Side rules
Posts: 570
|
Post by butchgo on Nov 19, 2023 9:21:11 GMT -5
I’m not opposed to the outlaws. Have any of you actually used them? I had a pair of the 2200 monoblocks for years and they were great sounding amps so I am assuming the 2220 will be even better. |
|
|
|
Post by pop on Nov 19, 2023 9:56:19 GMT -5
I have been seeing the prices are quite high on the used amps. Given the discount code currently I’m contemplating 2x XPA1, XPA2, 2x DR1, or a DR2
Not sure how far I’m willing to go, and all of those options are more than suitable for probably any speaker I could throw at the amps. My main concern is clarity at low volumes. My old XPA5 would make any speaker sing but at low volumes there was a bit to be desired. I’m not crazy about the chassis size of the HC1 otherwise I’d go that route.
Maybe I need to dig and see some comparisons with forum members between the XPA and DR series or I can create a new thread discussing a probably old topic. I saw some less than favorable reviews of the DR series but that was in measured distortion. Not sure how willing I am to accept that there is that much actual audible distortion in the DR series given Emotiva’s reputable history with amplifiers. But, I’ve been out of the circle for a while, so maybe they slipped?
|
|
|
|
Post by 405x5 on Nov 19, 2023 13:29:52 GMT -5
Lots of amplifier discussion here but I’ve yet to see anything about the preamp that you’re using and your concerns about low listening levels. (or did I miss something) To really get where you want to be with the warfedale’s the preamp should be the first order of discussion….tons of amps out there that will fill the bill……
|
|
|
|
Post by pop on Nov 19, 2023 19:29:49 GMT -5
Lots of amplifier discussion here but I’ve yet to see anything about the preamp that you’re using and your concerns about low listening levels. (or did I miss something) To really get where you want to be with the warfedale’s the preamp should be the first order of discussion….tons of amps out there that will fill the bill…… I have quite a few options. XSP1 Oppo 105 XMC1 RME ADI 2 pro It’s really a want to buy thread not a discussion thread, but by all means! I want overkill. I’ve always had multi channel amps and have a hankerin’ for monoblocks. Shoot, I have a UPA5 that will probably do exactly what I want it to. I plan on adding quite a few different speakers as I have good storage for them at my new place. I really don’t want to think about amps anymore. I’d like a lot of power for solid dynamics at low levels. XPA5 is the most competent amp I’ve owned. I’ve borrowed and listened to many more Emotiva stereo and mono amps. |
|
|
|
Post by novisnick on Nov 20, 2023 0:24:22 GMT -5
The DR-2 is all the amp you need unless you want to join the Society. Membership will set you back a few more dollars! But, it has its advantages.
|
|
|
|
Post by creimes on Nov 20, 2023 3:03:11 GMT -5
Lots of amplifier discussion here but I’ve yet to see anything about the preamp that you’re using and your concerns about low listening levels. (or did I miss something) To really get where you want to be with the warfedale’s the preamp should be the first order of discussion….tons of amps out there that will fill the bill…… I have quite a few options. XSP1 Oppo 105 XMC1 RME ADI 2 pro It’s really a want to buy thread not a discussion thread, but by all means! I want overkill. I’ve always had multi channel amps and have a hankerin’ for monoblocks. Shoot, I have a UPA5 that will probably do exactly what I want it to. I plan on adding quite a few different speakers as I have good storage for them at my new place. I really don’t want to think about amps anymore. I’d like a lot of power for solid dynamics at low levels. XPA5 is the most competent amp I’ve owned. I’ve borrowed and listened to many more Emotiva stereo and mono amps. I should have a MPS-1 in my hands soon enough, given to me for the price of shipping(shout out to mike here on the lounge, very kind to do), I'm looking to connect up to my SMSL DO400 DAC/PRE and run 2ch to my Chane 753's, the amp has 7 amp blades but I will for now being using 2 for 2ch use. Chad |
|
|
|
Post by 405x5 on Nov 20, 2023 8:06:41 GMT -5
Lots of amplifier discussion here but I’ve yet to see anything about the preamp that you’re using and your concerns about low listening levels. (or did I miss something) To really get where you want to be with the warfedale’s the preamp should be the first order of discussion….tons of amps out there that will fill the bill…… I have quite a few options. XSP1 Oppo 105 XMC1 RME ADI 2 pro It’s really a want to buy thread not a discussion thread, but by all means! I want overkill. I’ve always had multi channel amps and have a hankerin’ for monoblocks. Shoot, I have a UPA5 that will probably do exactly what I want it to. I plan on adding quite a few different speakers as I have good storage for them at my new place. I really don’t want to think about amps anymore. I’d like a lot of power for solid dynamics at low levels. XPA5 is the most competent amp I’ve owned. I’ve borrowed and listened to many more Emotiva stereo and mono amps. Understood Not looking to change the thread, but your discussion about dynamics and low listening levels went towards helping you get where you wanna be.…… You’ve got an XMC1?! Very intriguing thought to put that to work as a stereo preamp coupled with the blocks of your choice. You’d have one hell of a combination. I never tried the loudness compensation feature of the XMC1 in stereo without a subwoofer. too much bloat with the sub, but in stereo without it it might be a very effective tool. Coupled with all the EQ available on that unit but that could be one hell of a pair. |
|
|
|
Post by pop on Nov 20, 2023 9:17:01 GMT -5
The DR-2 is all the amp you need unless you want to join the Society. Membership will set you back a few more dollars! But, it has its advantages. With the discount codes DR1s are $935 more than a dr2 for that true 1000 watt mono block! (15% vs 25%) really, not too shabby. I do possibly worry about power requirements with dual Dr1 seeing as I’ll have quite a few components plus a high powered PC, 2 sub etc. in the mix. My upstairs has less than ideal outlets and very little access for additional outlets. I live in a finished out Barndo. It does beg the case for less power consumption. Probably a call to Emotiva to discuss load vs the XPA would be warranted. |
|
|
|
Post by pop on Nov 20, 2023 9:19:10 GMT -5
I have quite a few options. XSP1 Oppo 105 XMC1 RME ADI 2 pro It’s really a want to buy thread not a discussion thread, but by all means! I want overkill. I’ve always had multi channel amps and have a hankerin’ for monoblocks. Shoot, I have a UPA5 that will probably do exactly what I want it to. I plan on adding quite a few different speakers as I have good storage for them at my new place. I really don’t want to think about amps anymore. I’d like a lot of power for solid dynamics at low levels. XPA5 is the most competent amp I’ve owned. I’ve borrowed and listened to many more Emotiva stereo and mono amps. Understood Not looking to change the thread, but your discussion about dynamics and low listening levels went towards helping you get where you wanna be.…… You’ve got an XMC1?! Very intriguing thought to put that to work as a stereo preamp coupled with the blocks of your choice. You’d have one hell of a combination. I never tried the loudness compensation feature of the XMC1 in stereo without a subwoofer. too much bloat with the sub, but in stereo without it it might be a very effective tool. Coupled with all the EQ available on that unit but that could be one hell of a pair. The XMC is such a Swiss Army knife. It’s very clear. My desire for more came from low listening. I hooked an XPA2 up to my old system and lower listening levels were very dynamic compared to my xpa5 |
|
|
|
Post by bardx86 on Feb 14, 2024 12:54:46 GMT -5
I have 2 UPA-1 mono blocks for sale.
Brad
|
|
|
|
Post by 405x5 on Feb 14, 2024 14:26:18 GMT -5
After three months from last year, this thread may be nothing but an old story by now
|
|
|
|
Post by creimes on Feb 14, 2024 22:37:42 GMT -5
|
|
