|
Post by mick on Aug 16, 2019 16:50:20 GMT -5
That "I read it here" link is gone. Now I want to know where I can get a 404-E ?? No it's not gone, its still there. just checked again, no mention of the V3 board.
|
|
|
Post by ttocs on Aug 16, 2019 17:29:46 GMT -5
No it's not gone, its still there. just checked again, no mention of the V3 board. Sorry mick but I still get the "page not found" when clicking on the link you supplied. No biggie because like you say, the XMC-1 to RMC-1 trade-in page is posted. So, it lists the trade-in pricing with the original 1.4 board but doesn't say anything about an extra $399 discount with the V3 board like the XMC-2 trade-in page does. Also, something just hit me - with the XMC-2 trade-in program delayed it will then be at the cutoff of when my warranty expires. This means that if I would rather get the XMC-2 I might be out of luck because I bought mine early!!! At this time I'm actually considering the RMC-1 instead, but until I hit the button for Place Order Now nothing is set in stone. This might be bad. edit: Just thought of something. Dirac did not ship with the original batches of XMC-1, it came out in December. I believe that this is when the clock started ticking on both the warranty and the 30 day trial period. Do I have this correct?? If so, then the October delay for XMC-2 trade-in won't knock it out of the running.
|
|
|
Post by AudioHTIT on Aug 16, 2019 17:32:03 GMT -5
XMC-2 doesn't have Dirac? When it will be available? XMC-1 has it and Xmc2 will downgrade the sound :-( Lonnie had this to say about Dirac, it was part of the RMC/FW 1.5 announcement and implies to me they’re still waiting on Dirac for the API. “ Next up is Dirac. We have also been diligently working on the interface to link our system to their code. From our last meeting with Dirac we are hoping to have the final API very soon.” Keith also made some comments about Dirac and all models ... emotivalounge.proboards.com/post/1001220/thread
|
|
|
Post by mick on Aug 16, 2019 18:20:36 GMT -5
No it's not gone, its still there. just checked again, no mention of the V3 board. Sorry mick but I still get the "page not found" when clicking on the link you supplied. No biggie because like you say, the XMC-1 to RMC-1 trade-in page is posted. So, it lists the trade-in pricing with the original 1.4 board but doesn't say anything about an extra $399 discount with the V3 board like the XMC-2 trade-in page does. Also, something just hit me - with the XMC-2 trade-in program delayed it will then be at the cutoff of when my warranty expires. This means that if I would rather get the XMC-2 I might be out of luck because I bought mine early!!! At this time I'm actually considering the RMC-1 instead, but until I hit the button for Place Order Now nothing is set in stone. This might be bad. edit: Just thought of something. Dirac did not ship with the original batches of XMC-1, it came out in December. I believe that this is when the clock started ticking on both the warranty and the 30 day trial period. Do I have this correct?? If so, then the October delay for XMC-2 trade-in won't knock it out of the running. No you wont be cut off, as long as the unit and warranty was is in your name your good to go
|
|
|
Post by rbk123 on Aug 16, 2019 18:32:17 GMT -5
No it's not gone, its still there. just checked again, no mention of the V3 board. Sorry mick but I still get the "page not found" when clicking on the link you supplied. No biggie because like you say, the XMC-1 to RMC-1 trade-in page is posted. You have to copy and paste the link he posted. Clicking it does some translation ending up with page not found, but that link address does still work (if you don't actually click on his link).
|
|
Lsc
Emo VIPs
Posts: 3,344
|
Post by Lsc on Aug 16, 2019 19:22:41 GMT -5
XMC-2 doesn't have Dirac? When it will be available? XMC-1 has it and Xmc2 will downgrade the sound :-( Lonnie had this to say about Dirac, it was part of the RMC/FW 1.5 announcement and implies to me they’re still waiting on Dirac for the API. “ Next up is Dirac. We have also been diligently working on the interface to link our system to their code. From our last meeting with Dirac we are hoping to have the final API very soon.” Keith also made some comments about Dirac and all models ... emotivalounge.proboards.com/post/1001220/threadIt’s summer break in Sweden so I doubt they will get anything until September. Then Emotiva has to make sure their code to the api is good unless they wait until they get the api before starting development. Either way, I’m looking around November timeframe.
|
|
cawgijoe
Emo VIPs
"We made too many of the wrong mistakes." - Yogi Berra
Posts: 4,904
|
Post by cawgijoe on Aug 17, 2019 6:49:03 GMT -5
I’ll be patient and wait. Excited to hear reviews soon. Assuming we will receive an email about trade in if we signed up.
|
|
|
Post by wizardofoz on Aug 19, 2019 23:24:10 GMT -5
Glad I didn't send one of mine to Franklin when I was in the states in July. And so we wait some more...anyway until the thing is running in the wild bug free I bet many will be sitting tight or on the fence. No Dirac is a show stopper for many too I bet.
|
|
|
Post by mick on Aug 20, 2019 9:38:17 GMT -5
Glad I didn't send one of mine to Franklin when I was in the states in July. And so we wait some more...anyway until the thing is running in the wild bug free I bet many will be sitting tight or on the fence. No Dirac is a show stopper for many too I bet. Yep, i'm a fence sitter, Living in AUS it would also be helpful to know what modules are coming out and more importantly WHEN As i wouldn't want to ship the RMC-1 back to the states three times. round trip would be at least $700aud x three
|
|
|
Post by chipless on Oct 13, 2019 21:03:21 GMT -5
Anyone have an update as to the estimated start date for the XMC-1 to XMC-2 trade-in program?
|
|
|
Post by creimes on Oct 13, 2019 23:44:39 GMT -5
Anyone have an update as to the estimated start date for the XMC-1 to XMC-2 trade-in program? No official word as of yet, best to keep tabs on it through their website. Chad
|
|
|
Post by ttocs on Oct 14, 2019 15:14:21 GMT -5
I spoke to someone at Emotiva today and was told an announcement is due "this month".
|
|
|
Post by Hair Nick on Oct 14, 2019 15:39:15 GMT -5
Expect it this week.
|
|
geebo
Emo VIPs
"Too bad that all the people who know how to run the country are driving taxicabs and cutting hair"
Posts: 24,188
|
Post by geebo on Oct 14, 2019 15:55:27 GMT -5
So will I be able to bring my XMC-1 to the open house and trade it out then?
|
|
|
Post by Hair Nick on Oct 14, 2019 16:18:40 GMT -5
So will I be able to bring my XMC-1 to the open house and trade it out then? If you would like to wait that long
|
|
|
Post by dj7675 on Oct 15, 2019 11:47:46 GMT -5
|
|
|
Post by rochesterboy on Oct 15, 2019 12:05:27 GMT -5
Thank you just placed an order online. I have 4K board so I am hoping that they will issue a refund for $399+tax.
|
|
|
Post by dj7675 on Oct 15, 2019 12:39:28 GMT -5
Thank you just placed an order online. I have 4K board so I am hoping that they will issue a refund for $399+tax. Very welcome. I was just a little surprised to see it there.
|
|
|
Post by dj7675 on Oct 15, 2019 12:47:08 GMT -5
I'm thinking about order it as well. The one thing holding me back is no Dirac yet. I have heard people use the PEQ filters for the XMC1/2. Anyone here using REW to export filters to their XMC2? I have used REW before but it has been a little while. If I could convince myself I could do this I would order.
|
|
|
Post by goodfellas27 on Oct 15, 2019 13:03:49 GMT -5
I tried getting the trade-in, but it appears the site isn't working correctly. I called in and the billing guy isn't there. I also tried playing with Paypal, and it isn't working...I guess they don't like money.
|
|