|
|
Post by BillBauman on Apr 7, 2010 10:37:18 GMT -5
Edit: I called back and asked the question about firmware directly. The 2 weeks and 3 weeks statements are in reference to the new units that will ship with the new firmware already installed. The firmware is still looking good and "hopefully will be released by the end of this week."
I thought everyone would like to know, I ordered my UMC-1 today. In the process, I was informed that if I want to wait for the new firmware, it would probably be about 3 more weeks. Since today is April 7th, that puts us into early May at best.
To me, this is no big surprise. I'm thinking it might be a big disappointment to others, though. I would encourage everyone to hold it together, as I don't want to see this thread quickly deteriorate into another complaint-fest. We've already expressed our opinions that some want it now, some are willing to wait. It sounds like the choice has been made, and we're all going to wait. hemster brought up a good point, this was poorly worded. What I meant was that Emotiva has made the decision to release one, big firmware update, not piecemeal updates. So, whenever that firmware ships is when we'll get new firmware, and not before then. It could ship at the end of this week, it could ship in the next hour, and it could ship next month.
If you have any questions about the official status of UMC-1 shipments, firmware or T-shirts, call Emotiva at 615-790-6754 or 877-EMO-TECH (877-366-8324) during the hours of Monday through Friday 8am - 5pm (Central Standard Time), 9am - 6pm EST, 6am - 3pm PST.
I am posting this to share with others, not to instigate griping and more unhappiness.
|
|
|
|
Post by regulator on Apr 7, 2010 10:55:39 GMT -5
Thanks for the update. I was called a week ago that my UMC was ready, but I asked them to hold it until it has the lastest FW. They told me it would be a couple weeks.
As long as it works when I get it, I can be a little patient for this
|
|
tubby
Emo VIPs 
Route 2 in Weekapaug!!!
Posts: 408
|
Post by tubby on Apr 7, 2010 11:07:43 GMT -5
Is it possible that the 3 week delay is only for new units? The firmware itself might still be available this week for download but it may take them a few weeks to update the backlog of units thay have to ship out. Just a thought.
|
|
|
|
Post by BillBauman on Apr 7, 2010 11:19:00 GMT -5
Is it possible that the 3 week delay is only for new units? The firmware itself might still be available this week for download but it may take them a few weeks to update the backlog of units thay have to ship out. Just a thought. Yes, it is entirely possible. I said likely since I am not the definitive source on this topic. That said, I don't think they would sit and load several hundred units with firmware, and then start shipping in 3 weeks. Were the firmware ready at the end of this week, I assume they would start shipping updated units by Monday, one-at-a-time, flash, ship, flash, ship. |
|
|
|
Post by Brian on Apr 7, 2010 11:29:42 GMT -5
Is it possible that the 3 week delay is only for new units? The firmware itself might still be available this week for download but it may take them a few weeks to update the backlog of units thay have to ship out. Just a thought. Yes, it is entirely possible. I said likely since I am not the definitive source on this topic. That said, I don't think they would sit and load several hundred units with firmware, and then start shipping in 3 weeks. Were the firmware ready at the end of this week, I assume they would start shipping updated units by Monday, one-at-a-time, flash, ship, flash, ship. Why would you post if you don't know all the facts? Dan says the end of the week. That is the last update. |
|
|
|
Post by Brian on Apr 7, 2010 11:32:19 GMT -5
Greetings everyone!
Well, a beautiful holiday weekend is upon us. Spring has sprung!! I hope all of you enjoy it with family and friends.
As I mentioned on the web cast today, we are going to release the updated SW this coming week. Don't ask for it Monday, it'll be toward the end of the week! I'll post it officially here first, I promise you!
Everything looks great at the moment. We have tested it exhaustively, and we believe it is ready for prime time.
I'll have more to say here during the week. I've asked Lonnie for an updated listing of all major changes and corrections and he'll have this for us early next week.
Thank you for your trust, support, and patience. Also, I want to thank those of you who have sent me such kind and encouraging personal messages; it is truly appreciated.
Have a wonderful weekend.
Best regards to all,
Big Dan
|
|
hemster
Global Moderator 
Particle Manufacturer
...still listening... still watching
Posts: 51,952
|
Post by hemster on Apr 7, 2010 11:34:16 GMT -5
In the webcast they mentioned that a boatload of UMC-1s are imminent. This may mean that they're not at the Emotiva facilities in Franklin, TN yet but are expected within the next week or 2. If so, this could explain the 3 weeks stated above since the units will need to be flashed before shipping to customers. I still think that the FW update will be released later this week. And no, I do not have any inside information!  |
|
|
|
Post by dropzone7 on Apr 7, 2010 11:51:28 GMT -5
In the webcast they mentioned that a boatload of UMC-1s are imminent. This may mean that they're not at the Emotiva facilities in Franklin, TN yet but are expected within the next week or 2. If so, this could explain the 3 weeks stated above since the units will need to be flashed before shipping to customers. I still think that the FW update will be released later this week. And no, I do not have any inside information! I hope you are right. I might not bother to hook my UMC-1 up tonight if there is a chance we get firmware by the weekend. |
|
|
|
Post by BillBauman on Apr 7, 2010 11:52:31 GMT -5
Yes, it is entirely possible. I said likely since I am not the definitive source on this topic. That said, I don't think they would sit and load several hundred units with firmware, and then start shipping in 3 weeks. Were the firmware ready at the end of this week, I assume they would start shipping updated units by Monday, one-at-a-time, flash, ship, flash, ship. Why would you post if you don't know all the facts? Dan says the end of the week. That is the last update. Because there are just as many people here that would like to know what I was told and form their own opinions and speculations on it as there are that would prefer to only hear official updates. If you don't want to read anything other than official statements, then why did you open this thread? Next time, close your eyes. I think I did a pretty good job of making it pretty clear where to get any official updates from Emotiva and that this is my speculation. |
|
DYohn
Emo VIPs
Posts: 18,493
|
Post by DYohn on Apr 7, 2010 11:56:17 GMT -5
If you don't want to read anything other than official statements, then why did you open this thread? Next time, close your eyes. I think I did a pretty good job of making it pretty clear where to get any official updates from Emotiva and that this is my speculation. Many users, like me, use the "60 most recent posts" link at the bottom of the page so we do not open specific threads. We get your posts no matter where they appear... |
|
|
|
Post by BillBauman on Apr 7, 2010 12:02:37 GMT -5
If you don't want to read anything other than official statements, then why did you open this thread? Next time, close your eyes. I think I did a pretty good job of making it pretty clear where to get any official updates from Emotiva and that this is my speculation. Many users, like me, use the "60 most recent posts" link at the bottom of the page so we do not open specific threads. We get your posts no matter where they appear... Hmmm.. that's a tough one. I didn't know about that. Any suggestions? Close your eyes REALLY FAST as soon as you notice what the post is about, maybe? |
|
|
|
Post by Brian on Apr 7, 2010 12:09:19 GMT -5
I thought everyone would like to know, I ordered my UMC-1 today. In the process, I was informed that if I want to wait for the new firmware, it would probably be about 3 more weeks. Since today is April 7th, that puts us into early May at best. To me, this is no big surprise. I'm thinking it might be a big disappointment to others, though. I would encourage everyone to hold it together, as I don't want to see this thread quickly deteriorate into another complaint-fest. We've already expressed our opinions that some want it now, some are willing to wait. It sounds like the choice has been made, and we're all going to wait. hemster brought up a good point, this was poorly worded. What I meant was that Emotiva has made the decision to release one, big firmware update, not piecemeal updates. So, whenever that firmware ships is when we'll get new firmware, and not before then. It could ship at the end of this week, it could ship in the next hour, and it could ship next month. If you have any questions about the official status of UMC-1 shipments, firmware or T-shirts, call Emotiva at 615-790-6754 or 877-EMO-TECH (877-366-8324) during the hours of Monday through Friday 8am - 5pm (Central Standard Time), 9am - 6pm EST, 6am - 3pm PST. I am posting this to share with others, not to instigate griping and more unhappiness. You are too funny; Mod please close this thread. |
|
LCSeminole
Global Moderator
Res firma mitescere nescit.
Posts: 20,864
|
Post by LCSeminole on Apr 7, 2010 13:24:32 GMT -5
In the webcast they mentioned that a boatload of UMC-1s are imminent. This may mean that they're not at the Emotiva facilities in Franklin, TN yet but are expected within the next week or 2. If so, this could explain the 3 weeks stated above since the units will need to be flashed before shipping to customers. I still think that the FW update will be released later this week. And no, I do not have any inside information! Come on Hemster, we know you have the inside scoop, you moderators are just keeping this all hush hush.  ;D |
|
|
|
Post by thbrewst on Apr 7, 2010 13:40:10 GMT -5
I'm a little late to the game on this, but is there a proposed/expected list of things included in the FW update that someone can point me to?
|
|
hemster
Global Moderator
Particle Manufacturer
...still listening... still watching
Posts: 51,952
|
Post by hemster on Apr 7, 2010 13:51:27 GMT -5
In the webcast they mentioned that a boatload of UMC-1s are imminent. This may mean that they're not at the Emotiva facilities in Franklin, TN yet but are expected within the next week or 2. If so, this could explain the 3 weeks stated above since the units will need to be flashed before shipping to customers. I still think that the FW update will be released later this week. And no, I do not have any inside information! Come on Hemster, we know you have the inside scoop, you moderators are just keeping this all hush hush. ;D Shhh, not so loud LC.. we don't want everyone to know! ;D |
|
|
|
Post by BillBauman on Apr 7, 2010 14:21:54 GMT -5
I'm a little late to the game on this, but is there a proposed/expected list of things included in the FW update that someone can point me to? The most definitive list is in the update thread: emotivalounge.proboards.com/index.cgi?board=preamps&action=display&thread=9051 I don't believe the list is all-inclusive, but I think it's all we have to go on right now, unless there was something posted somewhere else. |
|
|
|
Post by thbrewst on Apr 7, 2010 14:59:48 GMT -5
I'm a little late to the game on this, but is there a proposed/expected list of things included in the FW update that someone can point me to? The most definitive list is in the update thread: emotivalounge.proboards.com/index.cgi?board=preamps&action=display&thread=9051 I don't believe the list is all-inclusive, but I think it's all we have to go on right now, unless there was something posted somewhere else. Cool, thanks. I had seen that, I just didn't know if there was a more finalized list though. I guess I was more up to speed than I thought (unfortunately)... |
|
|
|
Post by Mike Ronesia on Apr 7, 2010 15:36:50 GMT -5
In the webcast they mentioned that a boatload of UMC-1s are imminent. This may mean that they're not at the Emotiva facilities in Franklin, TN yet but are expected within the next week or 2. If so, this could explain the 3 weeks stated above since the units will need to be flashed before shipping to customers. I still think that the FW update will be released later this week. And no, I do not have any inside information! I hope you are right. I might not bother to hook my UMC-1 up tonight if there is a chance we get firmware by the weekend. Plug that puppy in! ;D |
|
|
|
Post by dropzone7 on Apr 7, 2010 15:59:12 GMT -5
I hope you are right. I might not bother to hook my UMC-1 up tonight if there is a chance we get firmware by the weekend. Plug that puppy in! ;D Ouch! okay, you twisted my arm. ;D |
|
|
|
Post by radridd on Apr 7, 2010 16:58:38 GMT -5
Great, now the game plan changes. I just ordered an onkyo 886 yesterday and will be here tomorrow. Oh well, if the UMC is finally ready for prime time I will have a 876 receiver and a 886 pre pro for sale!  |
|
;D
