|
|
Post by audiogeek on Nov 17, 2012 9:36:43 GMT -5
I was able to uninstall it by finding the unwise .exe file. Winrar sucks
|
|
|
|
Post by audiogeek on Nov 17, 2012 9:58:25 GMT -5
Starting over... I see the new install only has 2 files. The other one was for the old remote issue, I think. Wish me luck!
|
|
|
|
Post by audiogeek on Nov 17, 2012 11:16:48 GMT -5
Got the overtime error, so used the alt method, and it worked flawlessly! Yay! I must give credit to my wonderful wife for doing this. She is an IT security expert for the Treasury Dept, so I defer to her on most matters pc related. And btw, she was not at all impressed with the firmware update process.  |
|
hemster
Global Moderator 
Particle Manufacturer
...still listening... still watching
Posts: 51,950
|
Post by hemster on Nov 17, 2012 11:18:50 GMT -5
^ Congrats. Presumably you verified the version after the update, right? (just sayin;) |
|
|
|
Post by audiogeek on Nov 17, 2012 12:15:21 GMT -5
Haha... Actually, just did and it says .19
|
|
|
|
Post by audiogeek on Nov 17, 2012 12:18:13 GMT -5
Ran EmoQ and when I switch between man1 & none, I don't hear any difference. I used to be able to easily hear the diff (primarily ran it without any EQ). Do I have to change inputs for it to take effect now?
|
|
|
|
Post by audiogeek on Nov 17, 2012 13:23:55 GMT -5
Ok, it now seems to sound different. And I still prefer without. I've also gone back to my orig crossover settings. Sounds really good, clarity has improved some. I did leave the new calculated speaker distances, and the levels were pretty close to what I was seeing using my SPL meter. I think we're good to go!
|
|
|
|
Post by gkarracer on Nov 28, 2012 12:13:57 GMT -5
I'm not a fan of WinRar either. Instead use 7-zip. It is free and understands .rar files. This is the best compression utility I've seen so far. |
|
|
|
Post by rcduck7 on Dec 2, 2012 7:41:02 GMT -5
So when do i see what firmware i have on the frontpanel?? I asked this earlier as i wasn't sure the update was a succes with me. I would like to check this out.
|
|
hemster
Global Moderator
Particle Manufacturer
...still listening... still watching
Posts: 51,950
|
Post by hemster on Dec 2, 2012 9:32:32 GMT -5
So when do i see what firmware i have on the frontpanel?? I asked this earlier as i wasn't sure the update was a succes with me. I would like to check this out. To check the current firmware level of your UMC-1, on your remote, push Mute, then Status, then Vol+ (Volume Up). The firmware level will display on the LCD panel on the front of the UMC-1. |
|
|
|
Post by rcduck7 on Dec 3, 2012 14:56:44 GMT -5
So when do i see what firmware i have on the frontpanel?? I asked this earlier as i wasn't sure the update was a succes with me. I would like to check this out. To check the current firmware level of your UMC-1, on your remote, push Mute, then Status, then Vol+ (Volume Up). The firmware level will display on the LCD panel on the front of the UMC-1. Thanks for the info hemster. I tried it and it does say 7.04.00.19. This means the update was a succes. |
|
KeithL
Administrator
Posts: 10,256
|
Post by KeithL on Dec 19, 2012 11:01:53 GMT -5
Just an aside here about WinRAR..... I've personally been using WinRAR for at least fifteen years, and always install it on every new PC I set up... and I've NEVER seen it do anything odd or malicious like that. At most an unregistered shareware copy might pester you to register it. Did you get your copy from a legitimate source (either a reputable download site or www.rarlabs.com, where it originates)? If so, then it sounds like you have picked up some other sort of malware (or have something else bad going on). I have another problem. I need to uninstall the installer to add the latest version, and when I downloaded winrar originally it somehow removed about 70% of my programs from the add/remove programs list! Winrar tried to sell me a bunch of crap and attacked my computer. |
|
|
|
Post by garbulky on Dec 19, 2012 11:04:20 GMT -5
+1 on what Keith said about winrar. Never been malicious for me.
|
|
|
|
Post by geebo on Dec 19, 2012 11:18:35 GMT -5
+1 on what Keith said about winrar. Never been malicious for me. +2. I use Winrar exclusively and never had an issue. |
|
Erwin.BE
Emo VIPs 
It's the room, stupid!
Posts: 2,269
|
Post by Erwin.BE on Jan 11, 2013 19:48:38 GMT -5
My UMC-1 dates from the final batch, bought it Sept 2012. Only hooked it up this week, will do callibration tomorrow.
Is the firmware on mine up to date? How do I check it is?
Thanks
|
|
|
|
Post by AudioHTIT on Jan 12, 2013 1:06:58 GMT -5
My UMC-1 dates from the final batch, bought it Sept 2012. Only hooked it up this week, will do callibration tomorrow. Is the firmware on mine up to date? How do I check it is? Thanks See hemsters post about 5 up. |
|
Erwin.BE
Emo VIPs
It's the room, stupid!
Posts: 2,269
|
Post by Erwin.BE on Jan 12, 2013 7:37:10 GMT -5
My UMC-1 dates from the final batch, bought it Sept 2012. Only hooked it up this week, will do callibration tomorrow. Is the firmware on mine up to date? How do I check it is? Thanks See hemsters post about 5 up. Oh!  Thanks! I am reading W7.04.00.19 so I guess I'm good. Emo-Qued it just now. Seems to work out fine by me... |
|
mcwho
Minor Hero
Posts: 12
|
Post by mcwho on Aug 15, 2018 14:11:30 GMT -5
UMC-1 Firmware Upgrade
I moved last year and am resetting up all my audio gear. Noticed that the Firmware version is W7.02.00.00. THis seems a bit old and I am searching to see if the files are still available to upgrade to the latest Upgrade, which is W7.04.00.00.
I would like to have the latest firmware if possible.
|
|
mcwho
Minor Hero
Posts: 12
|
Post by mcwho on Aug 15, 2018 14:57:46 GMT -5
Does anyone on this board have a copy of the firmware file
UMC-1_V7_04_19.rar
My UMC-1 is at level W7.02.00.00 which is older and Id like to update it.
|
|
|
|
Post by Casey Leedom on Aug 15, 2018 15:08:17 GMT -5
If it was ever posted on the emotiva.com site, you can usually find it via the Internet Archive (AKA Internet Wayback Machine) at archive.org/web/ ... Casey |
|
