DC-1

[clearear]

The volume control is awesome. Music is clear and precise at all levels.

[wizardofoz]

Another blown up DC-1 because there is no warning on the units shipped outside the USA that its default setting is 115VAC and the added issue the selector switch is under the unit and not on the rear.

If the user is lucky its just the fuse. Either way it will be another unnecessary screwed up out or the box experience with what should be a simple thing.

[clearear]

Jan 15, 2014 9:43:00 GMT -5 wizardofoz said:

Another blown up DC-1 because there is no warning on the units shipped outside the USA that its default setting is 115VAC and the added issue the selector switch is under the unit and not on the rear.

If the user is lucky its just the fuse. Either way it will be another unnecessary screwed up out or the box experience with what should be a simple thing.

page 7, user's manual 1. Verify that the proper AC line voltage is selected on the red switch on the bottom of your Stealth DC-1 unit.

[siggie]

Jan 15, 2014 12:22:20 GMT -5 clearear said:

Jan 15, 2014 9:43:00 GMT -5 wizardofoz said:

Another blown up DC-1 because there is no warning on the units shipped outside the USA that its default setting is 115VAC and the added issue the selector switch is under the unit and not on the rear.

If the user is lucky its just the fuse. Either way it will be another unnecessary screwed up out or the box experience with what should be a simple thing.

page 7, user's manual 1. Verify that the proper AC line voltage is selected on the red switch on the bottom of your Stealth DC-1 unit.

User manual? Are we not men?

[dac0964]

Sorry to hear that but clearear is right it is instruction #1 on the page 7 Quick Start. Also, on the Emotiva DC-1 product web page under SPECIFICATIONS (bottom right) it says "115 VAC or 230 VAC; manually switched (switch on bottom of chassis)."

[dac0964]

Jan 12, 2014 14:22:38 GMT -5 clearear said:

Does anyone else get a small "pop" through their speakers when putting the unit on standby?

Now that I got my DC-1, I can tell you that I don't get a popping sound whenever I put it on standby.

[roadrunner]

Jan 15, 2014 13:48:40 GMT -5 dac0964 said:

Jan 12, 2014 14:22:38 GMT -5 clearear said:

Does anyone else get a small "pop" through their speakers when putting the unit on standby?

Now that I got my DC-1, I can tell you that I don't get a popping sound whenever I put it on standby.

I wonder if the Lounge member who hears a "POP" was eating Rice Crispies when he put his unit in standby.

[audiobill]

Emo-

Breakfast of Champions!

[wizardofoz]

Jan 15, 2014 13:48:40 GMT -5 dac0964 said:

Jan 12, 2014 14:22:38 GMT -5 clearear said:

Does anyone else get a small "pop" through their speakers when putting the unit on standby?

Now that I got my DC-1, I can tell you that I don't get a popping sound whenever I put it on standby.

And did you read all the manual before you jumped right in there and plugged it in?

[GreenKiwi]

I do hope that systems have simple checks for 120v vs 240v inputs. While people should read the instructions, they often don't. Fuses etc would be fine.

[sahmen]

Alternatively, since it is safe to assume that not every buyer might read the instructions before attempting to fire up the unit, Emotiva might consider shipping the unit with a single sheet advisory placed inside the box, and positioned in such a way that it would be seen during the unboxing... The sheet might look something like this:




                                                                               

                                               Warning!

Before you proceed, choose appropriate voltage rating for your location, using the selector switch on the DC-1 (or, the XSP-1, or whatever applies):

             
                                                                   

[dac0964]

Jan 15, 2014 21:43:38 GMT -5 wizardofoz said:

Jan 15, 2014 13:48:40 GMT -5 dac0964 said:

Now that I got my DC-1, I can tell you that I don't get a popping sound whenever I put it on standby.

And did you read all the manual before you jumped right in there and plugged it in?

As a matter of fact I did - twice! Once before it got delivered to me (in my excitement and anticipation) I read the PDF version and again when I got it before plugging in to make sure I did not forget anything. I guess I'm just like that when it comes to electronic stuff, I read the manuals

[yeahwicked]

Jan 16, 2014 3:17:54 GMT -5 sahmen said:

Alternatively, since it is safe to assume that not every buyer might read the instructions before attempting to fire up the unit, Emotiva might consider shipping the unit with a single sheet advisory placed inside the box, and positioned in such a way that it would seen during the unboxing... The sheet might look something like this:




                                                                               

                                               Warning!

Before you proceed, choose appropriate voltage rating for your location, using the selector switch on the DC-1 (or, the XSP-1, or whatever applies):

             
                                                                   

Merica, why you so backwards?

Also.. 16>1>2014
NOT  1<16>2014    I feel better now.

[clearear]

Jan 15, 2014 21:43:38 GMT -5 wizardofoz said:

Jan 15, 2014 13:48:40 GMT -5 dac0964 said:

Now that I got my DC-1, I can tell you that I don't get a popping sound whenever I put it on standby.

And did you read all the manual before you jumped right in there and plugged it in?

Yes I did thoroughly. Checked the voltage switch on the bottom too.
The "pop" was coming from my parametric equalizer installed between my amp and the the DC-1. This never happened when I was using the USP-1. Now I shut off the EQ first before putting the dac on standby or just leave them both on.

[monkumonku]

Jan 16, 2014 3:48:19 GMT -5 dac0964 said:

Jan 15, 2014 21:43:38 GMT -5 wizardofoz said:

And did you read all the manual before you jumped right in there and plugged it in?

As a matter of fact I did - twice! Once before it got delivered to me (in my excitement and anticipation) I read the PDF version and again when I got it before plugging in to make sure I did not forget anything. I guess I'm just like that when it comes to electronic stuff, I read the manuals

Same here, I read the manual of the DC-1 (and for all the audio gear I get) before I use it. I also CHECKED THE VOLTAGE even though I am in the U.S.A. just in case by chance it got switched to the wrong side.

Especially if you live in a country whose standard voltages are different than the country where the company selling the goods is located (notice I didn't say manufacturer, since the goods may be made in China), then you ought to know that the voltage may be set to the standard for the country of origin.

It's the responsibility of the user to read the manual. Why should Emo pay for someone not doing what they are supposed to do?

That's like if I have a car imported over here from England and then I complain because they put the steering wheel in the wrong place.

[KeithL]

It is always unfortunate when the magic smoke gets let out....

Actually, as a "courtesy", we do normally open up units going overseas and set them to the voltage that is appropriate for the DESTINATION country.

However, sometimes we miss one, and in some areas it's a little harder to tell what voltage will be in use, which is why we ALWAYS tell the user to check it.
(And, honestly, most people who are used to ordering any sort of equipment internationally know enough to check it and/or read the directions before plugging it in.)

And, luckily, since the DC-1 only weighs a few pounds (unlike our amps), most of us are strong enough to look on the bottom without undue strain.

Jan 15, 2014 12:22:20 GMT -5 clearear said:

Jan 15, 2014 9:43:00 GMT -5 wizardofoz said:

Another blown up DC-1 because there is no warning on the units shipped outside the USA that its default setting is 115VAC and the added issue the selector switch is under the unit and not on the rear.

If the user is lucky its just the fuse. Either way it will be another unnecessary screwed up out or the box experience with what should be a simple thing.

page 7, user's manual 1. Verify that the proper AC line voltage is selected on the red switch on the bottom of your Stealth DC-1 unit.

[dac0964]

Jan 16, 2014 3:17:54 GMT -5 sahmen said:

Alternatively, since it is safe to assume that not every buyer might read the instructions before attempting to fire up the unit, Emotiva might consider shipping the unit with a single sheet advisory placed inside the box, and positioned in such a way that it would be seen during the unboxing... The sheet might look something like this:




                                                                               

                                               Warning!

Before you proceed, choose appropriate voltage rating for your location, using the selector switch on the DC-1 (or, the XSP-1, or whatever applies):

             
                                                                   

Must they (Emotiva) also put a big warning label for every potential mistake a user could possibly make for not reading the supplied manual? Emotiva have done enough to inform potential buyers through the manual and the product web page.

[sahmen]

Jan 16, 2014 13:25:38 GMT -5 dac0964 said:

Jan 16, 2014 3:17:54 GMT -5 sahmen said:

Must they (Emotiva) also put a big warning label for every potential mistake a user could possibly make for not reading the supplied manual?  

Obviously not, because all the mistakes are not equal. Some set-up mistakes are trivial and are easily corrected without any irreversible damage to the equipment, so they need no special warnings. On the other hand, since applying the wrong voltage leads to blow-ups, and expensive extra costs for both parties, namely, RMA/overseas shipping costs, customs duties etc. etc., not to mention the costs involved in replacing the damaged components, the idea is to take one simple and cheap step (i.e. the suggested warning sheet) in order to forestall this particular type of avoidable damage, by emphasizing the importance of selecting the correct voltage rating before operating the unit...  I do not find this measure to be unreasonable or excessive, given the circumstances.

[chaosrv]

Jan 16, 2014 13:25:38 GMT -5 dac0964 said:

Jan 16, 2014 3:17:54 GMT -5 sahmen said:

Alternatively, since it is safe to assume that not every buyer might read the instructions before attempting to fire up the unit, Emotiva might consider shipping the unit with a single sheet advisory placed inside the box, and positioned in such a way that it would be seen during the unboxing... The sheet might look something like this:




                                                                               

                                               Warning!

Before you proceed, choose appropriate voltage rating for your location, using the selector switch on the DC-1 (or, the XSP-1, or whatever applies):

             
                                                                   

Must they (Emotiva) also put a big warning label for every potential mistake a user could possibly make for not reading the supplied manual? Emotiva have done enough to inform potential buyers through the manual and the product web page.

What's next? A cup of coffee with a warning that contents may be hot? Oh wait...

[hemster]

Jan 16, 2014 14:30:14 GMT -5 chaosrv said:

What's next? A cup of coffee with a warning that contents may be hot? Oh wait...

A cup of coffee with a warning that contents may be wet?