|
|
Post by petew on Oct 22, 2019 19:22:58 GMT -5
I changed my vote too. From RMC-1L to XMC-2. But if the bugs aren't done and gone by the time I need a processor, I'll go elsewhere. Monoprice prepro is in beta testers hands now, with full Dirac and six Dirac presets. I'll spend twice as much to get a unit that doesn't piss me off every time I use it. And I need something that's bug free so the significant other will use it.
|
|
|
|
Post by thrillcat on Oct 22, 2019 21:07:48 GMT -5
I just changed mine to keep my XMC-1.
I'm hoping to be moving in the next few months, which will involve a new theater build (yay). Once that is planned, I'll decide if I need to upgrade. If I had to upgrade today, I'd likely go Arcam or Acurus, need to do more research when the time comes. I've been pretty disappointed by Emo's progress, or lack thereof, on this new round of processors. Really looking like they're still having the same problems they had/still have on the XMC-1. Even with the killer upgrade offer, it's not worth it to me to commit to another processor that may or may not work properly for years to come.
Futureproof is only as good as the product. I'd rather have a non-futureproof processor that is at least fully functional, than a future proof processor that may or may not ever be bug free.
I haven't given up yet, but I'm not as sure as I once was that they'll ever have a bug-free processor on the market. Disappointing.
|
|
|
|
Post by AudioHTIT on Oct 23, 2019 0:02:31 GMT -5
Similar to Mrs. Choate on Seinfeld (Jerry stole her marble rye), "I change my vote". I changed from upgrading to XMC-2 to keeping my XMC-1/V3. Just spent a bunch on a new panel and don't want the distraction of all that XMC-2 has to offer. Although, . . . . . . . the new Dirac bass management is a very strong attraction, so . . . I think the XMC-1 vote is way under represented. |
|
|
|
Post by jhurst on Nov 3, 2019 8:21:27 GMT -5
Xmc 1 owner since 2014 or so. Iβve had 4 triad ceiling speakers ready to install if emotiva can ever get the rmc line ready for prime time. Looking closely at the 1L if they have it running smoothly. I know Dirac isnβt out yet but Iβm sure itβll come in time. My concern is if I buy now will the unit be buggy?
|
|
|
|
Post by geebo on Nov 3, 2019 8:38:31 GMT -5
I went ahead and paid for the RMC-1L trade while at the Emotiva Open House yesterday. My wife preferred it partly because of the nicer and bigger gold thingies on the back. That was all the nudge I needed to move up from the XMC-2  |
|
|
|
Post by cwmcobra on Nov 3, 2019 8:54:06 GMT -5
You're a lucky man, Geebo...my wife is totally unaware of the importance of nicer and bigger gold thingies on the back of a processor. She's a keeper! Well, actually both are...  Chuck |
|
|
|
Post by AudioHTIT on Jul 8, 2020 20:15:34 GMT -5
Thought Iβd bump this thread, many units purchased over the last several months, did everyone vote? Also might mention again, if youβre still on the fence the first post has some good info comparing the models.
|
|
|
|
Post by donh50 on Jul 8, 2020 20:40:16 GMT -5
Little scary to think it's been over a year and they're still working the bugs out and have not released Dirac Live yet... Getting close, as usual.
That said, a good bump, as I was looking for that comparison sheet the other day and couldn't find it!
|
|
endian
Seeker Of Truth
Posts: 2
|
Post by endian on Dec 21, 2020 7:10:42 GMT -5
|
|
|
|
Post by cwmcobra on Dec 21, 2020 7:42:32 GMT -5
My discount card and order instructions will arrive at Emotiva today. I've opted for the XMC-2 for a home theater that is very slowly being built. So, not ready to install it yet, but taking advantage of my discount while I can. So, just changed my vote from RMC-1 to XMC-2.
|
|
|
|
Post by markc on Dec 21, 2020 10:20:00 GMT -5
Yes, Emotiva responded extensively and got right onto it with astonishing speed. You are reading a 14 month old article then spreading mis-information! Those issues were completely resolved by Emotiva within just a few days of being raised. |
|
richb
Sensei
Oppo Beta Group - Audioholics Reviewer
Posts: 890
|
Post by richb on Dec 21, 2020 11:17:07 GMT -5
|
|
|
|
Post by wizardofoz on Dec 22, 2020 11:33:31 GMT -5
I used my discount card too for new Xmc-2...might eventually trade in my other 2 Xmc-1βs also
|
|
|
|
Post by mountain on Dec 22, 2020 13:22:43 GMT -5
I purchased the XMC-2 using the 25% for life upgrade to replace my umc-200, which failed. I was already looking at buying a 2 channel preamp with home theatre bypass and bass management. I mainly listen to 2 channel via usb (Roon/Tidal). I did not purchase this unit for Dirac. I have not even tried it yet. The Yamaha and emoq versions of room correction did little, if anything, for me in the past. I am fortunate enough to have a good room to begin with. I enjoy the sound quality of this prepro very much. Enjoy.
|
|
endian
Seeker Of Truth
Posts: 2
|
Post by endian on Dec 22, 2020 13:44:55 GMT -5
Has anybody from Emotiva responded? Yes, Emotiva responded extensively and got right onto it with astonishing speed. You are reading a 14 month old article then spreading mis-information! Those issues were completely resolved by Emotiva within just a few days of being raised. I don't think I am spreading it, but the review page should be updated by now with that infomation in that case! This makes me quite confused since richb replied an hour after you and says the issue is real and is caused by a "Momentum Data Systems implementation"? He also linked to a review of another product where the issue (or a very similar issue) was resolved by changing a setting. So is there still a problem, or has it been resolved. |
|
|
|
Post by routlaw on Dec 23, 2020 18:04:07 GMT -5
Just became aware of this thread, thanks for creating it.
Have not had the time to read through all of the responses but will get to them eventually. In the meantime I have the XMC-1 which has not been upgraded with the new video card. I'm still on 1080p projectors. Initially my thoughts were to upgrade to the XMC-2 but with time the RMC-1L became more intriguing somewhat due to the looks, better inputs theoretically and perhaps slightly better performance. Admittedly like most, initially I became a bit reluctant to jump in due to the many issues with all 3 of these devices, which I have experienced none with my XMC-1 other than some occasional freeze ups or lock ups easily rectified by turning off and back on.
I don't care about adding the umpteen dozen channels or so and am even satisfied with my existing system at 5.5 (not a misprint) and find it highly unlikely I would even add channels up to 7.5. With that in mind at this point I am thinking perhaps just upgrading the video card on my XMC-1 might be the better option. Although I am bit intrigued by the improved performance of the newer processors and presumably pre-amp aspect over the XMC-1 and what I perceive to be a better DAC in the newer models.
Cutting to the chase, is the improved audio performance for HT, two channel audio, and the advanced video card enough to warrant going for the trade-up from the XMC-1?
Thanks
|
|
|
|
Post by daveczski65 on Dec 23, 2020 18:06:06 GMT -5
Just purchased xmc-2 with my 40 off card,before they were no good
|
|
Lsc
Emo VIPs 
Posts: 3,435
|
Post by Lsc on Dec 29, 2020 13:19:31 GMT -5
Just purchased xmc-2 with my 40 off card,before they were no good Nice! Iβm on the fence on getting the RMC1L with the 40% card vs getting a second XMC2. I wish the RMC1L would equal improved performance for 3 channel but unfortunately I donβt think that is the case. |
|
|
|
Post by daveczski65 on Dec 29, 2020 14:47:55 GMT -5
Just purchased xmc-2 with my 40 off card,before they were no good Nice! Iβm on the fence on getting the RMC1L with the 40% card vs getting a second XMC2. I wish the RMC1L would equal improved performance for 3 channel but unfortunately I donβt think that is the case. Yea the extra 1000.00 just didn't seem worth it for me,plus the xmc 2 does everything I need, |
|
|
|
Post by davidl81 on Dec 29, 2020 16:18:02 GMT -5
Nice! Iβm on the fence on getting the RMC1L with the 40% card vs getting a second XMC2. I wish the RMC1L would equal improved performance for 3 channel but unfortunately I donβt think that is the case. Yea the extra 1000.00 just didn't seem worth it for me,plus the xmc 2 does everything I need, The XMC-2 continues to be the bets value in the Emotiva line up by a large margin. The RMC-1l is honestly mostly a cosmetic improvement as its almost unfathomable to actually hear the difference in fully balanced channels for the surrounds. And as of right now the RMC-1 is an even worse value since it is just a RMC-1l in a bigger box for $1000 more. Once Emotiva gets upgrade modules for it that may change though. |
|
