|
|
Post by withanx on Aug 7, 2013 13:15:45 GMT -5
I also can't believe I missed them becoming available again this morning.  Oh well, just one less thing I'd have to sell when the XMC-1 comes out... |
|
stiehl11
Emo VIPs 
Give me available light!
Posts: 7,269
|
Post by stiehl11 on Aug 7, 2013 15:27:42 GMT -5
I just looked at the site and wowzers, there's hardly anything left! I can't (maybe I can) believe that they went through 50 Pre-1 units in 26 hours. I'm glad I didn't wait until Emofest to buy one.
|
|
|
|
Post by geebo on Aug 7, 2013 15:30:37 GMT -5
I just looked at the site and wowzers, there's hardly anything left! I can't (maybe I can) believe that they went through 50 Pre-1 units in 26 hours. I'm glad I didn't wait until Emofest to buy one. And you can't get to the PA-7-350 page anymore. |
|
stiehl11
Emo VIPs
Give me available light!
Posts: 7,269
|
Post by stiehl11 on Aug 7, 2013 15:35:07 GMT -5
Yep, it looks like the best deals are gone. I'm just hoping that a mistake wasn't made and I'm S.O.L. I looked, and the money was debited from my account so there had better be a Pre-1 with my name on it taking the cruise from Asia.
|
|
|
|
Post by geebo on Aug 7, 2013 15:43:22 GMT -5
I just looked at the site and wowzers, there's hardly anything left! I can't (maybe I can) believe that they went through 50 Pre-1 units in 26 hours. I'm glad I didn't wait until Emofest to buy one. Are you gonna connect the ERC-1 to the PRE-1 then out to the XPA-2? |
|
stiehl11
Emo VIPs
Give me available light!
Posts: 7,269
|
Post by stiehl11 on Aug 7, 2013 16:07:27 GMT -5
I just looked at the site and wowzers, there's hardly anything left! I can't (maybe I can) believe that they went through 50 Pre-1 units in 26 hours. I'm glad I didn't wait until Emofest to buy one. Are you gonna connect the ERC-1 to the PRE-1 then out to the XPA-2? Actually, I'm going to use it in my bedroom system. I plan to go from the XDA-1 to the Pre-1 to the UPA-2. While the XDA-1 is adequate for what I need it to do, I would still like to have a better volume control and tone controls. |
|
|
|
Post by novisnick on Aug 7, 2013 16:17:10 GMT -5
I got in early and also picked up a pair of C12 fan units for my "Heating System" XPA-1Ls. These are very impressive units! I may go back to get one more for my other sound system. Great price for what you get.
|
|
|
|
Post by geebo on Aug 7, 2013 16:21:37 GMT -5
Are you gonna connect the ERC-1 to the PRE-1 then out to the XPA-2? Actually, I'm going to use it in my bedroom system. I plan to go from the XDA-1 to the Pre-1 to the UPA-2. While the XDA-1 is adequate for what I need it to do, I would still like to have a better volume control and tone controls. For the short time I had mine connected to the Airmotiv 5s I really liked it. But I soon realized I would rather have it connected in my main system. It'll stay there until the XMC-1 comes out. Then, back into the bedroom it goes. I think you'll be pleased. |
|
|
|
Post by vinylfreak on Aug 7, 2013 16:59:04 GMT -5
Pre 1s are gone.....I tried.....=(
|
|
|
|
Post by danny01 on Aug 7, 2013 17:04:13 GMT -5
I have no idea why I ordered one. I was hypnotized by the price.
Sent from my DROID RAZR using proboards
|
|
|
|
Post by Gary Cook on Aug 7, 2013 20:25:05 GMT -5
Let's see, what's in my Zone 3 (garage)  ; mig welder linisher angle grinder air compressor die grinder pedestal drill rattle gun, drill and a few more battery power tools air conditioner dust extractor band saw 2kw of halogen lights fixed parts washer plus a portable high pressure washer The RCA's from the UMC-200 for Zone 3 are around 20 metres (60 feet). I'd consider that a long run with plenty of electrical noise. Not all at once, I'm handy with the power tools but I only have 2 hands  I can hear the music over most of the gear, obviously not the mig, angle grinder or die grinder. Noise cancelling headphones are handy too. Cheers Gary |
|
|
|
Post by novisnick on Aug 9, 2013 23:55:25 GMT -5
Just plugged my 36 year old vinyl spinner into my new Pre -1 and boy! It never sounded so good! I had tried phono to Yamaha in but it didn't sound this good, what a great deal.
|
|
|
|
Post by danny01 on Aug 12, 2013 23:55:34 GMT -5
I just sent an email to cancel my Pre-1 order. I don't have a need for one. I was planning on storing it, just as a backup. I doubt they'll do it since it said all sales were final. If you guys want to try to get this one, call and ask tomorrow and mention this post. But if they don't let me cancel it, I will ask them to ship it to you if you want.
|
|
|
|
Post by repeetavx on Aug 21, 2013 9:21:21 GMT -5
I got an email from Emotiva, it says:
Anyone else know anything about a firmware update for the PRE-1?
|
|
|
|
Post by novisnick on Aug 21, 2013 9:25:34 GMT -5
I got an email from Emotiva, it says: Anyone else know anything about a firmware update for the PRE-1? what is this up date going to do. I received my Pre-1 2 weeks ago and it seem to not play sound on HT Bypass unless I switch to a different input and then back. This all happens when I start my Pre-1 and Yamaha for the first time of the day |
|
|
|
Post by geebo on Aug 21, 2013 9:32:13 GMT -5
I got an email from Emotiva, it says: Anyone else know anything about a firmware update for the PRE-1? what is this up date going to do. I received my Pre-1 2 weeks ago and it seem to not play sound on HT Bypass unless I switch to a different input and then back. This all happens when I start my Pre-1 and Yamaha for the first time of the day Mine has done that but only on a very few occasions. So I am also wondering about a firmware update now... |
|
stiehl11
Emo VIPs
Give me available light!
Posts: 7,269
|
Post by stiehl11 on Aug 21, 2013 9:44:48 GMT -5
I got the email as well and was wondering the same thing. I'm a little disappointed, but it's not the end of the world. As long as it still sounds good after the update, I'm happy.
|
|
|
|
Post by novisnick on Aug 21, 2013 11:09:29 GMT -5
Last shipments of Pre -1 s had A volume limiting problem using the remote . The delay
In shipment will be to fix this little problem before shipping to costumer. This info
Per tech support
|
|
|
|
Post by Hair Nick on Aug 21, 2013 11:10:46 GMT -5
Hey guys a quick statement about the "update". My sales guys told me that any update to the Pre-1 is a physical update to the volume knob. There is no firmware update currently.
|
|
|
|
Post by geebo on Aug 21, 2013 11:13:53 GMT -5
Hey guys a quick statement about the "update". My sales guys told me that any update to the Pre-1 is a physical update to the volume knob. There is no firmware update currently. Thanks for the info. My volume control is fine other than being a little touchy but not a big deal for me. |
|
;
I can hear the music over most of the gear, obviously not the mig, angle grinder or die grinder. Noise cancelling headphones are handy too. 
