|
|
Post by Hair Nick on Oct 28, 2016 15:17:19 GMT -5
|
|
|
|
Post by solidstate on Oct 28, 2016 18:45:30 GMT -5
Shame you guys didn't stick with the feature set of the Fusion Flex with two inputs, remote, IR in and RS-232 features. That little guy makes a great network controlled zone amp when used with a Global Cache iTach or Flex RS-232 to Ethernet bridge/adapter. |
|
LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,858
|
Post by LCSeminole on Oct 28, 2016 19:19:01 GMT -5
Thanks Nick!!! As I've been saying, once in stock I'd be ordering. Now that I've ordered, I look forward to powering my Sennheiser HD600 headphones!!!  |
|
|
|
Post by novisnick on Oct 28, 2016 19:28:08 GMT -5
Thanks Nick!!! As I've been saying, once in stock I'd be ordering. Now that I've ordered, I look forward to powering my Sennheiser HD600 headphones!!! Just had an evil thought! Sure wish I could plug my BTM-1 into it!! Great! Now I think to tell y'all about it!! I was just thinking of my simple office that has no quality music in it. Thoughts? |
|
|
|
Post by knucklehead on Oct 28, 2016 20:11:22 GMT -5
Shame you guys didn't stick with the feature set of the Fusion Flex with two inputs, remote, IR in and RS-232 features. That little guy makes a great network controlled zone amp when used with a Global Cache iTach or Flex RS-232 to Ethernet bridge/adapter. The Fusion Flex is a great mini amp. I have the 'twin' - a Sherbourn PA 2-50 with two inputs. Very handy for powering zones and 2 channel setups. I've driven the song towers with a Fusion Flex amp. It did a very credible job. This looks to be one more hit in a long line of very good amps for Emotiva. The Fusion Flex is/was IMO more desirable than the mini or this one. Switching between sources and volume control via a remote is very handy. |
|
|
|
Post by leonski on Oct 29, 2016 0:43:26 GMT -5
Thanks Nick!!! As I've been saying, once in stock I'd be ordering. Now that I've ordered, I look forward to powering my Sennheiser HD600 headphones!!! Just had an evil thought! Sure wish I could plug my BTM-1 into it!! Great! Now I think to tell y'all about it!! I was just thinking of my simple office that has no quality music in it. Thoughts? Will the BTM-1 work with my DACMagic+ ? If so, maybe pick up a DM+ and give it a go. The preamp only version of this DOES have the BT input and you can ala carte an amp. |
|
|
|
Post by macromicroman on Oct 29, 2016 9:14:50 GMT -5
Welcome BasX-A100 to a great lineup of amplifiers.
|
|
|
|
Post by garbulky on Oct 29, 2016 9:48:19 GMT -5
Fantastic guys! Wish I had the full specs on the headphone output!! Especially at a cool 300 ohms!! Maybe 300 ohms with resistors and without?! But seriously, this is the huge draw of this amp. At $200 it's also priced very attractively for the headphone crowd.
|
|
|
|
Post by sahmen on Oct 29, 2016 11:08:41 GMT -5
"...Another special feature of the headphone outputs on the BasX A-100 is their ability to drive even the lowest efficiency planar headphones with ease..."
Talking about the lowest efficiency planars, I'm very curious as to how well this unit can drive the Hifiman He-6. That would be the ultimate litmus test for me. The BasX A-100 certainly seems to have enough power, but it is not just about output power, but also about a certain synergy, which makes me very very curious...
|
|
|
|
Post by leonski on Oct 29, 2016 13:15:29 GMT -5
I wouldn't get TOO wrapped around the axle with the 'direct coupled' headphone output. Very FEW headphones will take advantage of that and those that DO seem to be fairly expensive.
The hifiman HE-6 from the post above, are 1300$ The manufacturer recommends a 5 watt amp while the impedance of the cans is 50 ohms. The extremely low SENSITIVITY is partly offset by the small
air cavity they need to 'excite'.
Electrical compatibility might be important, but I'd settle for an Extremely QUIET amp. Any noise will right to your EARS.
|
|
|
|
Post by hosko on Oct 29, 2016 19:17:35 GMT -5
Shame you guys didn't stick with the feature set of the Fusion Flex with two inputs, remote, IR in and RS-232 features. That little guy makes a great network controlled zone amp when used with a Global Cache iTach or Flex RS-232 to Ethernet bridge/adapter. I know it's not as elegant as an in built solution but a box like This gives you IR to trigger control. Im pleased they kept the triggers because that gives you options. |
|
|
|
Post by Hair Nick on Oct 31, 2016 9:35:53 GMT -5
Very excited these guys are in. Will be looking to grab one for the garage and another to head up a Zone 2 to my back porch running audio from my Mac Airport Express through airplay.
|
|
|
|
Post by vincedea on Nov 1, 2016 12:49:14 GMT -5
hmm very interested in getting one but I guess I should see if i should sell the older one or keep it for another room. hmmmmmmmm
|
|
|
|
Post by geebo on Nov 2, 2016 6:58:45 GMT -5
Thanks Nick!!! As I've been saying, once in stock I'd be ordering. Now that I've ordered, I look forward to powering my Sennheiser HD600 headphones!!! So have you gotten it yet? Waiting to hear how it does with those Sens. |
|
LCSeminole
Global Moderator
Res firma mitescere nescit.
Posts: 20,858
|
Post by LCSeminole on Nov 2, 2016 17:27:36 GMT -5
Thanks Nick!!! As I've been saying, once in stock I'd be ordering. Now that I've ordered, I look forward to powering my Sennheiser HD600 headphones!!! So have you gotten it yet? Waiting to hear how it does with those Sens. Don't have it yet, the Emotiva site shows it will begin shipping Nov 7, so about another week before I get it! |
|
|
|
Post by geebo on Nov 2, 2016 19:04:26 GMT -5
So have you gotten it yet? Waiting to hear how it does with those Sens. Don't have it yet, the Emotiva site shows it will begin shipping Nov 7, so about another week before I get it!  |
|
LCSeminole
Global Moderator
Res firma mitescere nescit.
Posts: 20,858
|
Post by LCSeminole on Nov 2, 2016 19:17:50 GMT -5
Don't have it yet, the Emotiva site shows it will begin shipping Nov 7, so about another week before I get it! I've waited this long, another week or so won't break me! |
|
klinemj
Emo VIPs 
Official Emofest Scribe
Posts: 15,092
|
Post by klinemj on Nov 2, 2016 20:08:00 GMT -5
I've waited this long, another week or so won't break me! Oh it will...if I were you, I would throw a hissy fit and in defiance demand they ship yours to me for break-in. Mark |
|
LCSeminole
Global Moderator
Res firma mitescere nescit.
Posts: 20,858
|
Post by LCSeminole on Nov 2, 2016 20:43:49 GMT -5
I've waited this long, another week or so won't break me! Oh it will...if I were you, I would throw a hissy fit and in defiance demand they ship yours to me for break-in. Mark On Monday I called Emotiva customer service and told them I was going to hold my breath until I got my A-100. A laughing service rep said, "I hope you can hold your breath a Long, Long time!"    |
|
|
|
Post by TempTag on Nov 3, 2016 18:17:48 GMT -5
I have a couple of Flusion Flex models driving in ceiling area speakers and I've been happy with the SQ and signal sensing power on feature. I may pick up one of these for a third location. The one thing I'd love to see is a bridgeable model - this form factor would make a killer mini-monoblock!
|
|
