|
|
Post by Nemesis.ie on Oct 29, 2010 5:23:03 GMT -5
I suspect there are a lot of things that maybe "don't take quite right" until shutdown. Otherwise I am at a loss as to why things get written during shutdown at all - unless it is to save write cycles on the flash, but then if everything is written every shutdown it would reduce the life of the flash and shutdown should be faster if there is nothing to write (no changes made) I would think.
|
|
|
|
Post by SticknStones on Feb 17, 2011 12:50:14 GMT -5
Hello everyone. I have added the V7.4 to the form. As the Software stablilizes I hope most of our reports will now be on requests for future enhancements that may be UMC-2 or XMC. As usual thank you all for supporting this thread and form application.
As a reminder the Form application and reports are on page one of this thread.
regards,
Reg
|
|
LCSeminole
Global Moderator 
Res firma mitescere nescit.
Posts: 20,847
|
Post by LCSeminole on Feb 19, 2011 10:11:09 GMT -5
The UMC-1 will not lock onto the audio in movies that are in DTS-HD High Resolution. Examples: The "Life" series blu-rays narrated by David Attenborough, and many of the older Lion's Gate studio movies such as American Psycho, Stargate, Fifth Element, Jumper and Home. The newer re-issued versions of some of these have DTS-HD MA which work fine, so this issue with DTS-HD HR(High Resolution) should be considered a minor issue in my opinion. The work around for this minor problem is to set the Blu-Ray player to LPCM, instead of Bitstream. Thanks Dan & Lonnie and Crew
|
|
LCSeminole
Global Moderator
Res firma mitescere nescit.
Posts: 20,847
|
Post by LCSeminole on Feb 19, 2011 10:12:05 GMT -5
Hello everyone. I have added the V7.4 to the form. As the Software stablilizes I hope most of our reports will now be on requests for future enhancements that may be UMC-2 or XMC. As usual thank you all for supporting this thread and form application. As a reminder the Form application and reports are on page one of this thread. regards, Reg Thanks Reg, as this was the first time using your form. |
|
|
|
Post by SticknStones on Feb 19, 2011 14:29:13 GMT -5
Hello everyone. I have added the V7.4 to the form. As the Software stablilizes I hope most of our reports will now be on requests for future enhancements that may be UMC-2 or XMC. As usual thank you all for supporting this thread and form application. As a reminder the Form application and reports are on page one of this thread. regards, Reg Thanks Reg, as this was the first time using your form. You welcome. I have the UMC too but have not had to log any problems and have been fortunate. I am looking forward to the firmware upgrade when I get back home next weekend.  |
|
|
|
Post by wfdtamar on Feb 26, 2011 6:57:35 GMT -5
I thought the latest two versions of the firmware were 7.02 & 7.04, not 7.2 & 7.4? Could we have the correct numbering please?
Just had another look on the UMC-1 firmware page and they use 7.4! Jeez.
|
|
|
|
Post by SticknStones on Feb 26, 2011 12:28:33 GMT -5
I thought the latest two versions of the firmware were 7.02 & 7.04, not 7.2 & 7.4? Could we have the correct numbering please? Just had another look on the UMC-1 firmware page and they use 7.4! Jeez. No worries and it can be easily changed if I do make a mistake. |
|
|
|
Post by darien87 on Feb 28, 2011 11:10:32 GMT -5
Had complete audio loss when fast fowarding a BD with regular Dolby Digital audio via HDMI from my Samsung BDP-1600. I normally don't use this player but my PS 3 bit the big one last week. Screw Sony!  |
|
|
|
Post by darien87 on Mar 7, 2011 13:15:36 GMT -5
Had complete audio loss when fast fowarding a BD with regular Dolby Digital audio via HDMI from my Samsung BDP-1600. I normally don't use this player but my PS 3 bit the big one last week. Screw Sony! Had full audio drop out a few times last weekend with Hi-res audio from a BD while using the PS 3. This is the first time I have had that happen with the PS 3 for the last couple of firmware versions. Bummer. Maybe I'll go back to 7.05. |
|
|
|
Post by darien87 on Mar 14, 2011 12:49:18 GMT -5
Had a center channel drop last weekend. Bummer.
|
|
Crystara
Minor Hero
"Don't piss down my neck and tell me that it's raining"
Posts: 34
|
Post by Crystara on Mar 21, 2011 18:36:02 GMT -5
Hi I am having problems with DD+ there is picture but no sound, once I push the source button several times bingo on comes the sound it never did this with older firmware this could be a new fault  |
|
joehzar
Emo VIPs 
No job is to BIG....No fee is to BIG
Posts: 121
|
Post by joehzar on Mar 27, 2011 13:03:43 GMT -5
I am also having problems with my HD DVD player locoking on to DD+. This did not happen with previous firmware. I reloaded the new firmware and still the same thing. Picture but no sound. going through source gets the sound back on. I hope they will resolve this.
|
|
|
|
Post by doc1963 on Mar 27, 2011 13:13:25 GMT -5
I would recommend to all of us that are having issues with our HD-DVD players and DD+, in general, also email or call Tech Support directly. There is no guarantee that anyone from Emotiva sees and/or logs issues from this thread or form.
I also have the same issue and, as has been stated, this is new to this firmware. Never had a problem with any previous incarnations.....
|
|
|
|
Post by darien87 on Apr 11, 2011 14:54:31 GMT -5
Had complete loss of audio almost every time I would FF or Rewind when I was watching movies last weekend. Happened with a few different Blu-ray discs.
This was from my Samsung BDP-1600 bitstreaming HD audio.
|
|
|
|
Post by SticknStones on Dec 2, 2011 11:10:43 GMT -5
Hello Friends! Here is our UMC Feature and Issue Tracker solution. Please help us collect your issues and requests for the UMC product by using the input form. This will make it easy on all of us to see in one central repository all the needs from the UMC customer base. This will only work with your support and thank you for your consideration. Please press the access icon to open the UMC Tracker Input Form. Once you fill it out please press the submit button.  Once you have entered your issue or new feature request you can view all entries by pressing the UMC Tracker View All Entries icon.  The master database spreadsheet is secure and can be accessed by Emotiva to add their comments. All entries are immediately viewable. Emotiva can sort the data in several ways for us. I hope this will make our ability to share and view our constructive commentaries on the UMC-1 much easier for everyone. Thanks I updated the theme and added the v07.00.19 Firmware so we can track and then let Eric know it is there for his reference. I can add other options just let me know or add more values to a picklist et cetera. I made a copy of the old problems and the report will start with new ones. Since this was a rewrite of the code it makes sense in my view to start with V07.00.19 as the new baseline. As always thanks for your support. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 3, 2011 10:29:49 GMT -5
Well, it looks like I will sit out this particular version and wait for the fixes to it. I am quite happy with the performance currently using the last rev of the software before this new update.
I've been doing software development a LONG time, and I've learned to *never* use the first rev of anyone's code. And, since they said this was a *complete* re-write from scratch, it goes in my book as the first rev of the software.
Remember folks, it's easy to tell who the the pioneers are - they're the ones with arrows in their backs...
-RW-
|
|
|
|
Post by Nemesis.ie on Dec 3, 2011 10:47:21 GMT -5
The music clarity improvement is really nice (I think we say this every version!). If a new one can be turned around quickly I would agree that you should probably wait for it. |
|
|
|
Post by Youthman on Dec 5, 2011 1:32:04 GMT -5
I was under the impression this was supposed to be the final revision for the UMC-1. Is that incorrect?
|
|
NorthStar
Seeker Of Truth
"And it stoned me to my soul" - Van Morrison
Posts: 0
|
Post by NorthStar on Dec 5, 2011 1:43:40 GMT -5
It might not be incorrect or correct. ...Your impression.  |
|
Ctuna
Sensei
You can tune a piano, but you cant tunafish.
Posts: 712
|
Post by Ctuna on Dec 6, 2011 11:55:24 GMT -5
After seeing all the posts I am a little hesitant about doing the upgrade. The only problem I currently have is that the UMC is not locking onto channels quick enough. If you don't let the sound come up going between two different stations I have complete audio loss and have to turn off the power and turn it back on again.
If I let it lock on and hear sound there is never a problem. I can live with this for now, Boy do I take a chance an upgrade only to get a different problem ?
|
|
